Close

2277 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • DIY Night Vision Scope
  • Instructions     from DIY Night Vision Scope
  • SOURCING A NIGHT VISION TUBEI found this to be the most challenging step to this build. Though there are a fair number listed on Ebay, many had defects (scratches on the screen or portions of the tube burned out). Stay away from these. You will be much...

  • DIY Night Vision Scope
  • Instructions     from DIY Night Vision Scope
  • CONSTRUCTING THE NV TUBE BODY AND LENS MOUNTSTUBE BODYPVC pipe is a excellent material for this project. It is strong, easy to cut and easy to glue. Further, it will accept paint if properly primed. There are those that have access to metal working tools...

  • LED Strobe
  • Instructions     from LED Strobe
  • The negative wire (green) is connected to the "in" side of the switch. you will want to also connect the wire to the copper pad you just exposed. The positive wire will be connected to the positive end of the Multivibrator circuit. the negative wire...

  • Bluetooth Arcade Controller
  • Instructions     from Bluetooth Arcade Controller
  • Build yourself a nice box, hopefully wired up better than I did above, and get playing.  Some handy additions that I plan on putting in are:External access to the USB port for charging / syncingExternal LEDs (or make the existing ones externally...

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • WARNING! These instructions are somewhat premature and are intended to demonstrate the design for the hackaday.io prize competition. I'll be continuing to refine the instructions as I improve on the design and as issues crop up. Please get...

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Set up and test Apitronics hardwareSet up the Apitronics Bees and Beaglebone Black Hive to make sure all the hardware is working. They should just work out of the box, but the firmware for both the Apitronics Bee and the Apitronics Hive are still...

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Add the hive scale sensor to the Apitronics Hive sensor database.Follow the instructions in the Apitronics Wiki under the CouchDB section to add a sensor definition to the Hive. You can probably stream raw data without doing this...

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Install the scale.The scale should be roughly level (beehives are often tilted slightly forward to keep water out, that should be fine) and fully supported on the bottom. The hive must be centered on the scale to avoid tipping.

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Turn on Bee and HiveAs long as the units are close enough (hundreds of feet with minimal obstruction, more with direct line of sight), the data should start showing up with the hive immediately.

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Install the Solar PanelIdeally, it should be tilted at an angle equal to your latitude and pointed toward the equator to  collect maximum sunlight, but laying it on top of the hive should also work as long as there are no sensors eating up excessive...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday