Close

1408 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • Frame
  • Instructions     from GRawler - Glass Roof cleaning crawler
  • Think beforehand how wide the crawler should be, or how wide the lanes are to move along. The length of the profiles and threaded rods depends on that, i use 700mm. Make sure that the profiles dip 1-2mm into the side panels Through the side panels and...

  • Fix Up Down Arrangement
  • Instructions     from Cute Drawing Robot - Servo and Android
  • 1) Now the stand is ready. We want an arrangement to hold the servos and move up and down in the rail. 2) I use a old pen. Cut the pen in to two pieces and insert into the rods, The pen inner dia is more greater than the rod dia. So i insert a straw...

  • Conclusion:
  • Instructions     from Make Wall Art with an iDraw A3 Pen Plotter
  • I absolutely love the iDraw 2.0 A3 pen plotter, and I'm super excited to use it for many more projects. As a beginner, this pen plotter has exceeded my expectations and opened up a whole new world of creativity for me. Setup was a breeze, and it works...

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • The complete mechanism. The light blue pieces,the rod,and the magenta pieces, connect de X axis to the belt moved by the motor in the Y axis. In the X axis, the four green pieces form a platform where we will fix the pen holder. The yellow piece joined...

  • Grandma's Pill Box
  • Instructions     from Grandma's Pill Box
  • Cut holes for the button and buzzer, and another to show the cloud indicator led. My button is not flush with the box top, so I attached a taller piece of plastic to the button with velcro. Poke holes in the box top with a sharp pen and push the long...

  • Undercover Art
  • Instructions     from Undercover Art
  • Step 2: Cutting, Scoring, FoldingOnce you have cut out your shapes, it's time to score all those dotted lines. Scoring the lines helps make each fold crisp and straight. To score the lines, we put a ruler along each line and drew on top of each line...

  • PuriBottle
  • Instructions     from PuriBottle
  • To make the ultrasonic sensor work, you have to read this program and create the circuit that matches with it!Here is the program:/* * created by Rui Santos, http://randomnerdtutorials.com * * Complete Guide for Ultrasonic Sensor HC-SR04 * Ultrasonic...

  • 3. Buying and cutting
  • Instructions     from Saw game
  • The next step is buying whatever material you need based on the previous steps. You'll also need a bunch of screws, dowellings, a saw, a metal rod with 5-10mm diameter based on the dimensions you chose, a wooden rod long enough to be cut in half and...

  • Finish the modules
  • Instructions     from PolyMod: modular digital synthesizer
  • Each module needs a face plate, which should measure around 150mm by (max) 38mm, although you may want to make slightly narrower modules (e.g. 35mm) to make sure there's a bit of wiggle room between them. Once you've cut your blank face plates, you will...

  • Landing Legs
  • Instructions     from SpaceX Falcon 9R Lamp
  • The landing legs will likely be the most frustrating part of this build. A vise will be ideal, a C-Clamp could work if a vise is unavailable, although I wouldn’t recommend it. Tape up a couple of landing leg halves and place it against the bottom of...

  • Solder 1206 capacitor and resistor practice stalks
  • Instructions     from SMT Garden
  • Gather your supplies.  You'll need: a soldering iron (60W min) set to 700-750F (370-400C)a fine but not sharply pointy tip (0.8mm is good and we prefer bent tips)a flux pen (rosin RMA or water-soluble, most no-clean is not active enough)small diameter...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday