156 Results for "%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EB%8D%94%ED%82%B9%E2%81%B4 %E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91noise%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91control %EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4 %E2%84%83%C3%9E%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4contrived"

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Cree Dimming Level
Instructions from Cree Dimming Level
Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

I2C Sensors and debugging
Instructions from Stratux ADSB Receiver and AHRS
I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

WiFi ePaper
Instructions from WiFi ePaper
Flash a NodeMCU firmware imageFor flashing a new image, I use esptool. Plugin your NodeMCU module to an USB port, clone the esptool project and flash your firmware. Usually a new device will appear, like /dev/ttyUSB0. Step by step:git clone https://github.com/themadinventor/esptool.git...

RGB P4 Led Matrix Clock based on ESP32
Instructions from RGB P4 Led Matrix Clock based on ESP32
Schematics / AssemblySolder the elements on the printed circuit board according to the circuit diagram, instructions and markings placed on the printed circuit board.Connect the WeMos MiniID1 ESP-32, 16 pin male header using soldering or connectors.Insert...

Instructions
Instructions from Budget DIY ESP32 GPS Base Station and Receiver
Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

Instructions
Instructions from DIY Ntrip Server and Reference Station Setup
DIY Onocoy Reference Station Setup GuideIn this guide, we’ll walk you through the process of setting up your own GPS Onocoy server using cost-effective hardware options and reliable GPS receivers. Whether you’re interested in enhancing the accuracy of...

EDID Inserter
Instructions from EDID Inserter
Plug in the freshly minted EDID Inserter and a repeated invocation of the following should yield only 256 FFs typical of an EEPROM fresh from the factory:sudo i2cdump 3 0x50Dire admonitions are issued even when merely trying to read:No size specified...

Decoding Eddystone UID
Instructions from Bluetooth Beacon proximity gateway
Beforedecoding the advertisement data, we need to understand what isEddystone. Eddystone was created by Google as a open format to be used on Android and iPhone devices. On the format specification, 4 different format are described. Eddystone-UID – Used...

Redtree Hydra: A modular platform for robotics
Instructions from Redtree Hydra: A modular platform for robotics
Attaching a SensorIn order to attach a sensor, motor, camera or other component to the Redtree Hydra, the FPGA inside must be programmed. We know that this is normally a tricky task, so we created a tool to simplify it. The Redtree Hydra has four I/O...

Sigma Derby Clone
Instructions from Sigma Derby Clone
Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

Control a Humidifier with a Raspberry Pi
Instructions from Control a Humidifier with a Raspberry Pi
Make executable and add to startupsudo chmod +x /etc/init.d/raspiRHTindex sudo update-rc.d raspiRHTindex defaults 80

Create the Software Stack for your Bespoke Application.
Instructions from Tachyonic Quasi-Crystals vs. Unobtainium?
The resources to facilitate the creation of bespoke applications for Windows which can interface with either Arduino or Propeller via serial, USB, Bluetooth, or TCP/IP are provided in the GitHub repositories. Thus the "propeller debug terminal...

MINI-Zee: a $100 DIY smart drone with the Pi Zero
Instructions from MINI-Zee: a $100 DIY smart drone with the Pi Zero
Bill of Material (US$ - Transport & taxes excl.):Raspberry Pi Zero 5.MPU 9205 (SPI 9 dof IMU) 8.MS 5611 (SPI Baro) 9.PCA 9685 (16 channel PWM Servo Driver) 5. 3.3 v. regulator 1.BEC 3 amps 3.Breadboard, Resistors, Connectors, Misc. 7. AutoPilot: 38.HobbyKing...

1
2
3
4
5
>
>|