From the rods, i have cut several pieces: From the squared rod, 4 pieces that are 8 cm longFrom the rectangular, 2 pieces that are 10 cm long From the round, 2 pieces 22 cm longFrom the threaded bar, one piece 24 cm long
A reinforcing bar was added to the base to increase the overall stiffness of the build. The reinforcing bar was the remainder of the 1.5 x 1.5 x 24” stick from which I made the connection blocks. All of the second plywood sheet has been used up...
To build the frame for our autonomous surface vehicle (ASV), we utilized T-slotted aluminum extrusion. Aluminum was the perfect choice for our vehicle frame as it is lightweight, strong, relatively low cost, and resistant to corrosion and rust. T-slotted...
Installing This is an application-level program, not a system command or system feature. It is an add-on to your product software, and as such there is no global "apt-get install". You will need a copy of the source to modify for your needs. Step 1:...
An overview over what components and tools were used in this build. More on how the parts were selected in the next step. The components are divided among what's needed to make the PCB which acts like the watch movement, and the watch body itself. Electronics...
In the previous step, we did the hardware configuration part. Now, in this step, we will be setting up the Tuya IoT Platform for operating the smart bulb and after that, we will upload the code in the Arduino UNO board with the help of Arduino IDE which...