Find an Apt Gasoline Car to Modify into an Electric CarThe first step is to look for an appropriate gasoline car that can be converted. Although the choice is completely yours, you should look for a car that is enough roomy and has manual transmission...
We need:- 1 x Part 011-1- 1 x Part 012-1- 2 x Servo Arm (Cross)Now we are going to fix the servo arms to the 3D printed part. This step is very important because we have to ensure that the servomotor is centered. If it is not centered, once assembled,...
Step 6: Fix Legs to Body Connect the legs to the hub of the micro servo, important like the foot servos you must check the legs are able to rotate 90 degrees each side respect to the body. After verifying the alignment fix them using the small screws...
Setup GertbotThe GertBot is a motor/power controller for the Raspberry Pi. I amusing model B . Although it comes with a detailed manual you can be up and running quickly.1. Connect the motors and power supply to the GertBot. I am m using 2 x 9 volt batteries.2....
Attach the motor to the mount using the (longer) 30mm screws: Repeat this for the second motor but this time mirrored. The end result should look like this:
ALio MCU Break Out Board is not like ordinary one. It is designed to fit TQFP44, TQFP32, MLF32, and SOIC IC packages on one side. On the other side, it has a unique pad to fit SMD components for your microcontroller’s minimum requirements, such...
Beware, Pi zero has 2 micro USB ports : one on the right for power, the second (between the other micro-USB and micro-HDMI port) for USB device like the gamepad (or a keyboard). Connect : 1/ the HDMI cable to your TV, 2/ connect the power cableto...
The electronic part can be soldered to a breadboard. See the attached schematic for detail. I also attaches the eagle sch-file if you like to make your own pcb. To protect the electronic from moisture, everything including the batteries can be built...
Hey, what's up, Guys! Akarsh here from CETech. This project of mine is more of a learning curve to understand the working of the small Bluetooth module from Reyax. First, we will understand the module alone and try to use it directly, then we will...
For most cartridges, you simply need to stick your USB device into the case and screw it together. Some, like the Wemos D1 Mini cart, require a bit more work as you'll need a small micro USB extension cable and a few zip ties. Ideally you would use #6...
Put the belt to motor gear and hang it on wall (need 2 nails hammered on wall). Overall, the robot looks like a jellyfish, it is swimming around the wall to make drawing :) The robot is about 400gram, hang on wall with 2 nails. So it is easy set up at...
Hack a mouse (optional) Open the casing of the mouse, and remove the scroll roller.Now, you should have space to place the servo motor like in the picture.To paste servo motor on the mouse board, use a glue gun or double sided tape.Now, there should...
3d Printed Part DesignDesign in sketch upI knew before I started that I would use some 3d printed parts. You do not need to but a 3d printer but they make creating new things so easy. With this in mind I started thinking about where 3d printed...
Laboratory InfrastructureWe need to setup workspaces to help this place function as a lab.Things like tables and shelves are super necessary for setting up equipment, and getting to work! Nearby hanging straps are also useful to putting bags full of...
Stick prongy-leggy things into a breadboard anywhere you like, as long as you follow the dot-to-dot schematic. Try each section at a time, and try again. Electret microphone amplifier. Showed directly connected to speaker for testing. Sine wave generator...