154 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

[2016] InternetS of Energy - Call me DAISEE
Instructions from [2016] InternetS of Energy - Call me DAISEE
Ethereum installation on a Raspberry PIAn Ethereum node running on a Raspberry Pi. Photo by RIeul (CC-BY-NC-SA) Equipment 3 Raspberry Pi with Ethereum client (each Pi = a node of a blockchain) 3 SD cards 2 computers Other solution Using Wio Link to simulate...

Print the 3D Enclosure - specifically, the AC plug SHIM is needed prior to PCB assembly
Instructions from AC Wall Adapter PCB for IoT
The Plug Shim (spacer) is needed to assemble the PCB. It must be installed before soldering the AC plug to the PCB and the AC plug itself must be soldered to the PCB before the AC-DC Converter Module

(Optionally) Add a grounded AC socket and replace the existing input plug with a grounded plug.
Instructions from Deluxe A.C. Light Bulb Current Limiter
I bought a cheap 8-foot 16/3 (16 guage grounded) extension cord from the Big Box Store and cut it, leaving 6 feet for the plug-end and 2 feet for the socket-end. De-solder the input wires to the DPDT switch and replace & re-solder with the 6 foot...

Attach the plug shim to the back of the AC plug. Orient the plug as shown in the photos and solder.
Instructions from AC Wall Adapter PCB for IoT
See photos for the proper orientation - don't install the AC plug upside down! Double check this step.

Install the 90 Degree Micro USB Male to Micro Female Plug Adapter
Instructions from Balancing Robot
Plug the USB adapter into the SAMD21 mini breakout board.

Step 40 - Solder 8-way connectors to 8-way 90-degree headers and phototransistor/resistor for M5 Stick C Plus 'Mako'
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
The 8-way HAT for the M5 Stick C Plus ‘Mako’ requires an 8-way Micro JST male socket and an 8-way 90-degree header to be soldered together. All pins have straight through connections. There is also a resistor and phototransistor that needs to be connected...

Starfish Cat: Your Lovecraftian Furby-like Friend
Instructions from Starfish Cat: Your Lovecraftian Furby-like Friend
Plug in your Cat's nervous system. Connect the Photon to your other components. I do this by using 3x20 breakaway right angle headers where several rows have been shorted together to be power and others to be ground. This lets me better organize my components.Pin...

Provisioning the Raspberry Pi
Instructions from GePS
Next, you're going to get the SD card ready for booting the operating system on the Raspberry Pi. This begins with copying the official raspbian lite image to the SD card. This is a process that can be done in many ways, and it slightly differs depending...

Ultraviolet Lightsaber. Kill COVID-19 with Style.
Instructions from Ultraviolet Lightsaber. Kill COVID-19 with Style.
UV-C bulbs use a dab of mercury plus a glowing hot filliment in a low pressure tube of glass to generate ultraviolet light that peaks around 253.7 nano meters, the optimal germicidal wavelength in the UV-C part of the spectrum. Not to be...

EDID Inserter
Instructions from EDID Inserter
Plug in the freshly minted EDID Inserter and a repeated invocation of the following should yield only 256 FFs typical of an EEPROM fresh from the factory:sudo i2cdump 3 0x50Dire admonitions are issued even when merely trying to read:No size specified...

Code
Instructions from Electromagnetic Levitation Stabilization Apparatus
Open a laptop with the Arduino software (https://www.arduino.cc/en/Main/Software).Download the code from https://github.com/stressmaniac/ELSA or copy the code belowConnect the Arduino to the laptop using the USB 2.0 cable.Press the upload button on the...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
Time to start putting together the low-side driver board with the CAT4101s. First step is to install the connector on the 11 x 8.5 cm protoboard. This is the spec'ed component, but if you can't find one that size, you can use another one up to 11.5 cm...

[2016] InternetS of Energy - Call me DAISEE
Instructions from [2016] InternetS of Energy - Call me DAISEE
Updating energy data on the blockchainA python script calls smart-contract functions to store data from CitizenWatt sensor. Installation of Ethereum RPC Client library : sudo pip3 install ethereum-rpc-client This library provides functions to interact...

Switch and Buzzer
Instructions from Medicine Timer
Plug the Arduino into a breadboard and attach the buzzer to A4 and GND. Attach a switch to A12 and GND.

[2016] InternetS of Energy - Call me DAISEE
Instructions from [2016] InternetS of Energy - Call me DAISEE
Peer-to-peer energy transaction "smart-contract"Note: all the code can be found (and remix) in the GitHub Repo.NEEDOne or few smart-contract, meaning algorithms that automated peer-to-peer small transaction between prosumer exchanging electricity on...

1
2
3
4
5
>
>|