2552 Results for "8-bit cpu"

Solder 1206 capacitor and resistor practice stalks
Instructions from SMT Garden
Gather your supplies. You'll need: a soldering iron (60W min) set to 700-750F (370-400C)a fine but not sharply pointy tip (0.8mm is good and we prefer bent tips)a flux pen (rosin RMA or water-soluble, most no-clean is not active enough)small diameter...

The top 3D-printed Raspberry Pi cases
Instructions from The top 3D Printed Raspberry Pi cases
If you are looking for the best 3D-printed Raspberry Pi cases, then you have come to the right place. In this article, we will be discussing the top 10 3D-printed Raspberry Pi cases that are available in the market. We all know that the Raspberry...

How to generate an animation with the Block Move command (BoingBall)
Instructions from NTSC/PAL Video Display Shield
I used a 8-frame GIF animation of the famous Amiga BoingBall and separately saved the frames with the help of IrfanView. With the same program the images got scaled that the ball had a size of 30 x 30 pixels with a 1 pixel border on all 4 sides making...

Step 5: Uploading Arduino Codes & Conclusion
Instructions from Spider Robot with Arduino
We have prepared a code for you so that you can move the spider robot without any problems at first. A few commands are ready in the code, but you can revise it yourself ;#include // include IR Remote library #include // include servo library //=====...

Read from SDHC card using Bus Pirate
Instructions from Read from SDHC card using Bus Pirate
Reading from the SDHC cardTo demonstrate that we can successfully read from the card, we use the read single block command CMD17.SPI>] r:8 [ 0x51 0 0 0 0 0 r:550 ] /CS DISABLED READ: 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF /CS ENABLED WRITE: 0x51 WRITE:...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
Adafruit GPRS Feather Code The crux of this code is the 'unravelData()' function which receives the stream of data and turns it into a character arrays called 'rabbits'. These arrays are then pretty much ready to be passed over to the FONA module for...

Load the program for the Arduino pro mini.
Instructions from Bracelet for the blind
//tác giả: Đỗ Xuân Tiến #include const int trig = 8; //chân trig của HC-SR04 const int echo = 7; //chân echo của HC-SR04 byte ngon_tay_cai_6 = 6; //ngón tay cái - thumb //byte middle_finger...

Third Part: RPi as a web server Using Flask and Python
Instructions from Raspberry Pi 3 as a Web Server Using Python IoT
First we need to install Flask On our Raspberry Pi What we will make Install the lightweight web framework Flask and set up a basic web server with different pages using Python, HTML, and CSS. What we will learn How to install software on your Raspberry...

Implement Charts/Graph
Instructions from Expense Tracker App
Type the following command to install the chart.js plugin: npm install chart.js --save Import the chart to the page where we need to use by typing the following code: import { Chart } from 'chart.js'; For this project, we are using the chart...

Code
Instructions from ESP32 Personal Bat Signals with Light and Sound
I used micropython, because I haven't used it for a project yet and I was shocked how well it worked for this. There are many tutorials on how to use Thonny with an ESP32, and I found it to be much quicker than doing this in Arduino/ C++. The main files...

Assembling the prepared components
Instructions from WinDIY - HAWT Wind turbine
So that the construction articles for WinDIY do not become too extensive, I have divided the construction into several articles. A certain component such as the wing built. Of course, these individual components have to be brought together at some point....

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...

Instructions:
Instructions from Laser XY Scanner
Step 1: Gather Your Components Laser XY Scanner - BOM I usually like to source my parts from DigiKey, but the low-cost options on Amazon are hard to beat sometimes. This list is just one of many sources for each component in the BOM. There are of...

CODE
Instructions from Open-Source Shallow Water Glider
The first code chunk declares the variables and establishes connections #include #include "Wire.h"#include #include "GravityTDS.h"#include #include #include "MS5837.h"#include "ping1d.h"#include "SoftwareSerial.h"#include "RTClib.h"#include //#include...

IRK! Infrared Remote USB Keyboard
Instructions from IRK! Infrared Remote USB Keyboard
Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

|<
<
168
169
170
171
>
>|