Close

671 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%9D%B4%ED%8A%B8%EF%BC%9Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC %EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80 %EF%BC%9E %EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%A3 %EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%9D%B4%ED%8A%B8%E1%98%A3 %EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94 %EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Rails
  • Instructions     from Rave in a briefcase
  • I went for 2x3U. I screwed a piece of roofing battens into the case and the bottom rail directly onto them. The middle rails are just screwed together and are laid onto some standoff I laser cutted out of some scrap wood. The top rail...

  • Clone of stEve
  • Instructions     from Clone of stEve
  • Mechanical assembly- Stepper motors into parts A1 & A2- Ends B1 & B2 slot into A1 & A2 to make a rectangle (B2 has no tabs, it goes in at the hook ends of A1 & A2)

  • Clone of stEve
  • Instructions     from Clone of stEve
  • - A1,A2,B1,B2 assembly snaps into base C (line it up and pull the two spring clips back if necessary)- Tape a nut into slots on B1 & B2 (tape on one side should be enough to stop the nut falling out)

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • Manual SMT Pick and Place Machine
  • Instructions     from Manual SMT Pick and Place Machine
  • License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

  • Electro-Magnetic Enabled Bagpipes
  • Instructions     from Electro-Magnetic Enabled Bagpipes
  • License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

  • Arduino GPRS IOT Weather Station
  • Instructions     from Arduino GPRS IOT Weather Station
  • License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday