Close

420 Results for "%E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%D1%86 %E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B %E3%83%8Bjim%E3%85%99the33%EC%85%94%EC%B8%A0%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%C4%B8fire the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89the33 the33%EB%9E%80%EC%A0%9C%EB%A6%AC%EB%A3%B8%E3%82%A1%EA%B0%95%EB%82%A8the33%E3%8E%8Fpointed%E3%83%A9"

  • The Powerplant
  • Instructions     from The Metabolizer
  • The powerplant is the system that stores, captures, and distributes the electrical energy the powers the whole system. It's the most expensive part of the system. The powerplant is made up of 5 basic sub-components:Solar Panels - To capture solar...

  • Analog solar power meter
  • Instructions     from Analog solar power meter
  • Now the actual script that filters the power data from the SMA logging:mkdir /home/pi/scripts nano /home/pi/scripts/show_actual.pyAdjust the values in #defines to match your preferences #!/usr/bin/python import time import datetime import wiringpi2 as...

  • Hacking the Conveyor
  • Instructions     from Long Range RFID Controlled Dry Cleaner
  • Controlling them is not too difficult! They already have remotes. The conveyors each come with 1 motor power supply cable and two foot pedals that can each tell the machine to go forward or backwards.(note when working in a strange place like a jungle...

  • Parts Details
  • Instructions     from PROJECT MOOBA
  • Raspberry Pi B+: The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz1GB LPDDR2 SDRAM2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLEGigabit Ethernet...

  • Wiring for UV Tube
  • Instructions     from Ultraviolet Microwave (name subject to change)
  • My instructions errs on making the wires too long. It’s easier to fix mistake with longer wires than too short. You can follow the schematic for how to wire this up and skip the detailed instructions. Take one of the tube wires and form it so that it...

  • Flash the Sonoff Mini with Tasmota
  • Instructions     from Sonoff Mini dual switch support
  • The Sonoff mini has a "DIY mode", which is for you, if you prefer learning a new rather complex proprietary process instead of wasting two seconds to pop open the case and another 45 to align a prommer to the flashing pads and flashing the normal way....

  • Smart Device Controller
  • Instructions     from Smart Device Controller
  • Story Smart Device Controller This is a very interesting yet simple project for controlling ac appliances through phone calls. We called this project a "Smart Device Controller". By following this guide, you will be able to know and make your Smart...

  • Diy Simple Inverter
  • Instructions     from Diy Simple Inverter
  • Story Simple DIY Inverter An inverter that uses the minimum number of components for converting a 12 V DC to 220 V AC is called a simple inverter. A 12 V lead-acid battery is the most standard form of battery that is used for operating such inverters....

  • Input Protection: Safety Matters !
  • Instructions     from Arduino Negative Voltmeter
  • This is the bi-directional diode clamping for over voltage or surge protection you may use in parallel to R_Low. I left this part in my build due to lack of space ! Bi-directional voltage clamp Safety should never be taken lightly ! These diodes will...

  • Lexitron RSS Reader
  • Instructions     from Lexitron RSS Reader
  • Tickernut circuit design and hardware:Enclosure:The motherboard is shaped to fit tightly inside a standard ABS jiffy box which set its limited size. The box has cutouts to expose all motherboard connectors on the left side and a small speaker and antenna...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday