In this step you need to adapt the graphics to your repository. To do this, edit the main PSD file and then print it on a regular A4 sheet. You can use the free online editor Photopea. If you want to, you can also print a label with...
Make sure you test the electronics before you assemble the clock. Every time I build the clock without testing, I realize I forgot to solder the power jumper. Prepare busSolder header and power jumperTestFinal assembly 1. Prepare bus The bus can...
In step four you are going to install Django on your Raspberry Pi. Downloads are available here https://www.djangoproject.com/download/, however I found that without an internet connection the installation hung up when trying to locate the pytz...
Same as in my previous project I'll use Atom, PlatformIO and Home Assistant with MQTT. Install PlatformIO IDE for Atom, HomeAssistant + Python Once more, you can follow this video to see more details about installation of HomeAssistant and Python. To...
Insert the electronic LED display, and attach the flap to the body of the bag. Be cautious not to damage the electronics, or the back of the bag while sewing.
Copy code bellow to main.cpp, connect NodeMCU to PC with micro USB cable and upload to NodeMCU.#include #define RED_LED 5 void setup() { // put your setup code here, to run once: pinMode(RED_LED, OUTPUT); } void loop() { // put your main code here, to...
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Consectetur purus ut faucibus pulvinar elementum. Sapien eget mi proin sed. Aliquet nec ullamcorper sit amet risus nullam eget...
Check that the 'Top' button works (that is the button shown on the right below), this will cycle through the different displays with a short press. Check that the 'Side' button works (this button is below the lens of the enclosure), this will show the...
STEP 0 : PRINT ALL THE PARTS - Start by Printing out all the Parts for the MK5 Kit, from the Top and Bottom Folders. You’ll also need a bottle cutter. You can order a Plastic Bottle and Can Cutter Tool or you can make the Free DIY Community...
Connect the servos to D3, D4, D5 and D6 to the mainboard as the diagram below. Connect the mainboard and computer with a micro usb cable. Open Arduino IDE under Tools, pick Board: Arduino Nano, Processor: ATmega328P (Old Bootloader) and the correct Port....
Kidding, but for comparison i really did started with that and configured everything i would like to have from this project on '5$' raspberry zero. So here it is What is missing on that images is external usb ethernet card and amp that was used...
Rotate the tile 90 degrees and get a straight line going for the end grooves. Once a line is established, lean the angle grinder so the blade now comes in at an angle. You need the end grooves to have a small angle to be able to wrap the nichrome...
Order PCB: PCBWay Eagle PCB Board Layout: GitHub Printable PDF: GitHub I fabricated the board using the Iron Method. I drilled four mounting holes in each corner with a diameter of 3mm. The PCB size is 3.3cm X 3.3cm .