420 Results for "%E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%D1%86 %E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B %E3%83%8Bjim%E3%85%99the33%EC%85%94%EC%B8%A0%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%C4%B8fire the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89the33 the33%EB%9E%80%EC%A0%9C%EB%A6%AC%EB%A3%B8%E3%82%A1%EA%B0%95%EB%82%A8the33%E3%8E%8Fpointed%E3%83%A9"

How to use your Milight lights with Google Home.
Instructions from How to use your Milight lights with Google Home.
Add your Milight lights to the ha-bridge software Open up the ha-bridge software in your browser (http://raspberry-pi-IP-address:80/), it runs on port 80 by default.You'll see a list of bridge devices, click add.Set a name and description to your likings....

Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Instructions from Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Cleanly sand the bottom side (or not)You want the tool to slide nicely on the foam. The best solution is to sand the bottom side with 80, 120, 180, 240, 260 and 500 grit sand paper. You could also apply a varnish. But this is a quick build. Put some...

Yet another laser engraver / cutter
Instructions from Yet another laser engraver / cutter
CalibrationCalibrating the X/Y-axis of a plotter or CNC machine is actually quite easy. I did it as described in this video. First i had to know the theoretical steps/mm per axis. To calculate this value I multipliedthe steps/rev. (200 for most NEMA...

Crazy Clock
Instructions from Crazy Clock
Locate a spare out-of-the-way spot inside the movement that can accommodate the board. For the Quartex Q-80 movement, the best place is between the latch and the sub-assembly on the side opposite where the coil and battery terminals are.If the board...

All to do with table saws
Instructions from All to do with table saws
The jimmy jig/ used 1/2in ply cover with laminate both sides, hardwood telescoped rails, or 20/80 aluminium extrusions and a clamp that forces the jig rails against the frame that surrounds the table saw/ rock solid, the fence will never deviate from...

Configure and check the speaker
Instructions from Fast video doorbell / intercom on Raspberry Pi
Right click on the Volume icon in the upper right corner and select "Analog". Now left click on the same volume icon and set volume. I suggest setting it to about 80%. Next, let's open up a console again, and run the following command: speaker-test You...

mandelbrot.py
Instructions from Mandelbrot on Pi Pico
MAX_ITER = 80 def mandelbrot(c): z,n = 0,0 while abs(z) <= 2 and n < max_iter: z="z*z" + c return n< body></=>

Purchase two Supermicro power supplies
Instructions from Supermicro to ATX Power Supply Adapter
The Supermicro PDB-PT825-36824 is a "23-pin" model and will accept both the 23-pin supplies and the 19-pin supplies. This is not an exhaustive list, but just the various models that I had sitting at home that I know fit into the PDB-PT825-36824....

Understanding how to disconnect the speaker
Instructions from Hush Owlet
moThe big black device in the middle of the printed circuit board (PCB) is the speaker (aka buzzer, or transducer). You can see a little slit in the one side where the sound comes out. There is a back side to the circuit board that you cannot easily...

Unix on your breadboard
Instructions from Unix on your breadboard
Connect USB cable to Fubarino and to your computer. Fubarino console will appear as a virtual COM port on your computer. Use any terminal emulation program (like putty on Windows or minicom on Linux) to connect to this virtual COM port at baud rate 115200....

Tetris on Duinomite board with LCD4884 shield
Instructions from Tetris on Duinomite board with LCD4884 shield
Disconnect USB cable. Plug LCD4884 shield into Duinomite board. Now connect USB cable and plug it into your computer. Duinomite console mode will appear as a virtual COM port on your computer. Use any terminal emulation program (like putty on Windows...

ESP8266 Useless Throwie
Instructions from ESP8266 Useless Throwie
Detailed instructions on the GitHub project page.TL;DR versionCheckout and install node packages.$ git clone git@github.com:mcauser/esp8266-useless-throwie.git $ npm install -g grunt-cli $ npm installView web version. Grunt will automatically open your...

Purchase your fans
Instructions from PC 140mm Air Filter
Head out to DigiKey and find some fans you like. Here is a query to get you started. 12V4-pinTube axialStatic Pressure at or above 0.5 inches of H20Sizes (square) 70mm80mm92mm92.5mm119mm120mm NOTE: The GitHub repository only includes OpenSCAD...

Instructions
Instructions from DIY Ntrip Server and Reference Station Setup
DIY Onocoy Reference Station Setup GuideIn this guide, we’ll walk you through the process of setting up your own GPS Onocoy server using cost-effective hardware options and reliable GPS receivers. Whether you’re interested in enhancing the accuracy of...

PCB Design
Instructions from Power Monitoring for your Mobile Home
The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used. The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

|<
<
2
3
4
5
6
>
>|