Close

27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • And now you are done
  • Instructions     from Twitch Relay Monitor
  • You probably did plenty of test steps along the way but this was all there was. I am assuming you know how to use relays and have some lights/motors/whatever planned to use with this device so knock yourself out. While there is nothing stopping it from...

  • Adjust the ideal SiPM voltage
  • Instructions     from All-In-One Gamma-Ray Spectrometer
  • With a multimeter, adjust the SiPM voltage by turning the potentiometers. Each full turn adds about 250 mV to the output, so you have plenty of resolution here. The potentiometers are connected in series, so you can use either and/or both of them to...

  • Print the cutting template and cut it out
  • Instructions     from Bike Tube Bow Tie
  • Print the cutting template on a A4 sheet of paper and cut out both bow tie ends. Note that this version has not been tested yet. You can also create your own, e.g. by making use of the scanned bow tie. There are also plenty of other good cutting templates...

  • Customer interviews

  • Instructions     from A desk for an engineer
  • If its a new product that has never been seen before or a copy of an old product, a customer will eventually use the thing. Even if it is just for your personal use, write down your needs so you can hit all your goals. For this project I wrote down what...

  • Step 2: Photo Editing
  • Instructions     from Coin Card
  • I'm using GIMP, just because I have used it a few times. It is easy enough to get used to, especially when you can google just about anything you want to do on it. First, I need to decide which colours can be merged into one. I have 4 colours to work...

  • Key dublication
  • Instructions     from A simple casting mould for hot metal key copying
  • Step 1: Fill the cavity of the mould with Fimo or a equivalent polymer clay and flatten the clay e.g with a round pice of wood or core follower. To prevent the two clay parts from sticking together while making the key indentation, powder some talkum...

  • Step 2 Soldering the circuit
  • Instructions     from Music Accessibility
  • 1. prepare all the material :   An arduino sheildSoldering materials4 servo motors4 buttons120cm wires * 12 60cm wires * 8 2. Braid the wires This step is for better wiring management and for avoiding short circuits. Braid the 60cm wires...

  • Motor drive
  • Instructions     from Eazy Peasy High Voltage Variable Capacitor
  • The basic capacitor is done.  This next section is how I built a motor drive to remotely position the capacitor. I decided to use a DC motor. Perhaps a stepper is a better idea, but for now I like this design. The motor I chose is overkill. It was...

  • Electric Kalimba
  • Instructions     from Electric Kalimba
  • Wiring it all upI soldered wires to header pins to make all the connectors I needed. If someone wasn't able or willing to solder (aside from the teensy), you could get away with buying lots of female header pins and krimp on electrical connectors. The...

  • Manual SMT Pick and Place Machine
  • Instructions     from Manual SMT Pick and Place Machine
  • Since we're going to actually hack a pre-existing product - a shop bought CNC engraving machine - the first step is to assemble the CNC engraving/laser machine - it comes as a kit with instructions of it's own (see below). The upright aluminium 2020...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday