Close

19513 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • Off to manufacture!
  • Log     from Desktop Thermometer
  • Both variants of the hardware have now been completed and tested on a breadboard. The code which drives all of this stuff is also pretty much ready to go.So it is all off to JLCPCB to get it manufactured. The down side is that it is the start of Chinese...

  • Programmer/Debugging Board
  • Log     from Desktop Thermometer
  • While I am waiting for the boards to arrive, the time could be spent explaining the idea behind a separate programmer/debug board.  As mentioned in a previous post, there is no way of programming the microcontroller while it is installed on the...

  • Design phase
  • Log     from Lunar PICO rover
  • Currently finishing out the design phase of the robot, along with acquiring/building all of the parts. Done-Tested PICO board controlling a motor and a servo Printed main chassis and it failed Redesigned main chassisAdded LoRa COM module...

  • Research - Other Reflow hotplates
  • Log     from Reflow Soldering Hotplate
  • Toby's Automatic MCH PD Reflow Hotplate (tindie, git-imuslab, hackster.io, CH554 SDCC)A USB-PD powered metal ceramic heater (MCH) based reflow hotplate. Key Features: USB-PDMCHFully automatic (and any changes requires reprogramming the IC) System...

  • Research
  • Log     from DIY Digital Caliper
  • I was think that I need get my hands on a a caliper first and disassemble it. To be honest I did not get any super interesting information out of that. I just ruined perfectly good caliper. The t-scale PCB is 0.5mm thick and has copper only on one side...

  • Design
  • Log     from DIY Digital Caliper
  • From the image above you can see the front, the back and the t-scale for my caliper. Bellow I will list a few things I considered while making this design. I chose the STM32F103 used in the blue pill because it is capable, cheap and schematic is...

  • PCBs are here!
  • Log     from DIY Digital Caliper
  • You can see that my board is quite bigger. Not to brag or anything... Everything seems to be up to scale. Waiting for the parts to arrive.

  • 3D models
  • Log     from DIY Digital Caliper
  • I have uploaded 3D models of the board and t-scale here. Also I added a model of a clip to hold the whole thing together, so it is easier to operate.

  • First prototype is ready!
  • Log     from DIY Digital Caliper
  • Hello all, I got the first board assembled! Everything seems to come together really nicely. I am missing one differential driver, but I will get another one soon. Let the coding begin! With a display it looks even better!

  • Original article OCR
  • Log     from NS 32000 cross-assembler in C
  • Dr. Dobb’s Journal, December 1986, page 48. A table-driven assembler that can be modified for other processors. Series 32000 Cross-Assembler by Richard Rodman, 1923 Anderson Rd., Falls Church, VA 22043 The 32000 processor features generalized addressing...

  • False Starts, Change of direction?
  • Log     from Uno 14500
  • I've been busy working on the PCB and routing on the computer, but while I'm getting much quicker and better at it, I've ran myself into a corner. We're gonna need a bigger board... This project is one of odd anachronistic design choices, pulling in...

  • First version
  • Log     from Arduino shield 4-digit 7-segment LED Display
  • 4-digit display shield build on the Proto board.See Fig.1. Parts List: 1. Arduino Uno R3 2.HiLetgo R3 Proto Shield Proto Expansion Board 3. 4-digit 7-segment LED display module     Model: 5641AS ,  Size: 0.56 x 1.98 inch ,  Emitting...

  • Niche placement
  • Log     from The Tile Job
  • Every tile job now must feature a niche. It's just one of society's rules. Fabricating a custom niche out of waterproof foam board seems straightforward, and that's the way I would do it if I had more experience with this. Instead, I've decided to go...

  • LPC1756 prototypes
  • Log     from Hardware 2FA TOTP authenticator
  • When I started this project I first made several prototypes to test all the features of the LPC1756. The first prototype was to make sure I could power up the LPC1756 and connect using JTAG and SWD.After the first basic prototype I made a small...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday