Close

3504 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워레깅스룸┒ Цpassed강남술집정보㎭쓰리아워가격쓰리아워가격╆ ¤강남쓰리아워invite 강남술집정보Ŋ쓰리아워ｈуserious"

  • More Turbos
  • Log     from Vacuum System for Deposition
  • I got another turbo pumps, this time a complete set, pump and controller. It is an Osaka Vacuum TG2003 rated for 2000l/s at 24,000 rpm. It is mag lev like the other pumps I had been trying to get going but a little more friendly. I plan on keeping an...

  • Let the build begin
  • Log     from 18" x 15" Aluminum 3D Printer
  • Roughly 80% of the parts came in today for the build. I will add a parts list to this project soon. I made a few miscalculations, not the least of which was buying too few screws! I'll put in another order this week and hopefully have the frame built...

  • It is getting there!
  • Log     from Obsolete Time
  • We are done with designing, just about to order the boards to be manufactured!A few "features" and design choices have been added or altered. We chose to go back the popular Arduino platform, not because MSP430 is hard, but more because the code is already...

  • Noise Immunity
  • Log     from Toy Claw Machine
  • Now that there have been a couple events under the belt for this machine: sons birthday party and a carnival, I am looking to make the claw machine more noise immune.  The last event showed a random reset of the machine that would cause it to home...

  • PCB's Done . . . but not tested. . .

  • Log     from Toy Claw Machine
  • The boards are finally finished.  This was a long time coming, but I could machine the pcb's (which I have been wanting to do pcb milling for quite some time, but things did not fall into place until now) the mill have to become operational.  The...

  • End Stops Created but DODGY
  • Log     from 5 Color 3D Printer
  • If the picture isn't a bit of how I felt when assemlbing these little tricksters than the explanation will.  The entire build except for one piece went smoothly.  Some parts were no longer being sold so I had to improvise with better newer...

  • Simplification
  • Log     from 5 Color 3D Printer
  • I'm not working on this project, and I am not working of this project for more than the reason of my other project taking precedence. But, I am still doing this project do to the need of this project. I have thought about the feasibility of what I have...

  • Problems arise.
  • Log     from Hexapod
  • oday saw the completion of the hardware assembly. The whole frame is together with all servos mounted. Unfortunately they shorted me one size m3 screw, so I had to go to Lowe's to get another, and they only had flat head screws. Now my OCD has me twitching...

  • putting the frame together
  • Log     from BuildLog Laser 2.x build
  • putting the frame together, just you get an idea of the scale of this, that's a full grown Irish wolfhound in the previous set.i'm using the countersunk screws here, they're obvious since almost exactly the right amount and the small right angle brackets...

  • frame mostly assembled
  • Log     from BuildLog Laser 2.x build
  • lightobject saturday shipped my drivers , once i realised the smoothieboard was not even gonna come close (without external drivers, and then i feel its a waste of a board). lightobect have been great to me so far.rear section (doge and frame)i pulled...

  • Wire-Wrapping Milestone!
  • Log     from Open Source DSKY
  • Many things have been accomplished since the last project log. Because of this, I'm going to split this into two project logs. A week after I posted my last project log, I finally received my shipment of 30 gauge wire from china. The order was divided...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday