177 Results for "bar%20robot"

[M] Sketching Tool Bar and Sliders
Log from SecSavr Sublime [gd0036]
Since my designs are both dependent on form and function, as well as other parts of the design, I've been hitting a few too many unknowns while trying to compute a solution for the tool bar and axis sliders. Tool BarI've gone with the idea of having...

v0.4 Completed bar the glamour shots!
Log from MeArm - Your Robot
Actually found the time today to finish the list of updates to v0.4.Added holes for cable managementCradle redesigned using less fixings and reducing the number of incorrect configurations to one (left handed versionLonger elbow leverShortened "pig"...

[M] X Arm and Tool Bar
Log from SecSavr Sublime [gd0036]
For the past 4 hours, I've been quickly modelling and this is where I've gotten to on the X Arm. Tool Bar Before going to the mini Z axis assembly in the X Slider, I wanted to look at modelling a concept Tool Bar. I added the Selects and a few Slights...

[T] Octopus Pro + EXP MOT and the Tool Bar
Log from SecSavr Sublime [gd0036]
Published: 14:53, Tues 24th May A few logs ago, I said I was going to watch a Spider V1.1 listing to wait until it got taken down or I could deduce it was legit, and the former happened as expected. There was even a Spider V2.2 for the same...

Power Terminals Design
Log from A 110 kWh Powerbucket
The battery string power terminals need to be tough enough to accept the huge 95 mm² ( > AWG 3/0) cable. The terminals are made of a piece of very heavy copper bar tin soledered to a piece of small 10 x 3 bar. The result is neat, compact and robust....

Dimensions
Log from Digibone
I've put a bit of thought into the pieces I'll need to build a suitable frame out of aluminium extrusion.It'll look cool, plus give me a nice, easy to assemble/adjust frame. It'll be nice to use the channels to run cables too. I've decided to target...

Chassis Grounding
Log from CNC Plasma Table
Trying to adhere to Hypotherms grounding suggestions the following grounding methods were loosely followed. Ground bar on the machine chassis that individually connects to the Y, X and Z axis.The Chassis ground bar also grounds out the work ground lead...

Chapter 2 - Adaptator X, Materials
Log from Adaptator X and the chamber of Pickle-Rick
First part of the microscope adaptator consisted of planning the strucure of it and cutting the parts.Our adaptator consisted of a main board, cutted in a particular way in order to fix the moving parts. The moving parts are small elongated pieces allowing...

Design Notes - Rev. 2
Log from D-DAQ
Following 9 months of research I became more aware of what I wanted and what hardware was available that I initially believed I could reasonably use to pull it off with:---------- more ----------Redraw rate of 60 Hz for one screen, 30 Hz for two. This...

Power Cell LEDs
Log from Hasbro Kids Proton Pack Conversion
Beyond painting the pack and adding more physical details, I felt it was important to add some lights to the mix. The original pack is completely inert, so really, anything would have been an improvement.As it just so happens, a common 8 x...

Battery power
Log from Portable UVC LED bar
The final version will have 4 x 18650 Li-ion batteries attached to the rear of the unit. The inside of the bar will be mostly occupied by the array, heatsink, controller, fans, driver, display, and wiring. Placing the batteries externally will avoid...

Display Board Version 2
Log from Rasterphonic Glove
This is a new version of the indicator board used to satisfy my love of blinky lights. It shows the XYZ position of each finger on three LED bar graphs. This is a much simpler design than the last one because I'm using one LM3914 or KA2284 chip for each...

Abandoned and Restarted
Log from Prototype SCARA Mark II
Why I StoppedI stopped because I was waiting for 1.2mm diameter end mills for the gear wheel. As they take about six weeks from China fro delivery I went on to other things.I had moved on by the time the 1.2mm end mills arrived!I did have a look a the...

#RetroChallenge @RetroChallenge Update 4
Log from A Retro-Authentic Microtronic Emulator
In this episode, I extend the pattern-based drum computer to full 16 steps / beats (4 bars x 4 beats), and tailor for real time drum pattern input (like a real drum computer). This requires inputting data from the keypad using the KIN (Keyboard...

Can I use X sensor?
Log from CarbOnBal
I just got an interesting question.Can I use X sensor?The answer depends on three basic properties;1 you need a 1 Bar sensor for best accuracy2 it must operate at 5V and produce a voltage swinging from as low as possible to as close as possible...

1
2
3
4
5
>
>|