Results for %E3%80%8A %EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98 OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%85%92%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80sweep%E3%81%94%EA%B0%95%EB%82%A8%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80conviction %EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%88%9B%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%8E%B9%E3%84%BB%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%B6%94%EC%B2%9Ccab

"Why worry? Each of us is wearing an unlicensed nuclear accelerator on his back." -- or, on The Independent Design and Production of a Functional-In-Universe Proton Pack
Log from "Ghostbusters" Indie Proton Pack Build
Right, so a Proton Pack functions, basically, by generating a highly-energetic, directional stream of intense, charged alpha radiation -- i.e., high-energy protons at high speed.If a cyclotron isn't a reasonable possibility, well, what is?Let's break...

Testing the 14500 HAT-like UPS supply with high current demands
Log from Single-cell Li-Ion Powered UPS for Raspberry Pi
First of all, let me clarify that with normal 14500 cells in general, a heavily loaded (with attached USB devices) or tasked (running all cores to the max) Raspberry Pi Model 3 will not run for long on these cells, if at all. Regardless of the capacity...

03 – cutting costs
Log from Universal undervoltage lockout up to 34V input
What is the aim? This log is all about: How can we make the whole board cheaper while keeping all the features and not killing its safety functions. This all refers to the early v0.2 version which is by no means optimized yet! Ways to cut costs I try...

Motor Control and Current Measurements work very well.
Log from Open Concentrating PV Solar Tracker Controller
Motor controller and current measurement This will be a long log, so I want to summarize: The motor controller of the “single board” works as expected and we can get a current measurement which is good enough to detect blocked or damaged...

Z80 SIO Emulation (part 2)
Log from 3-Chip Z80 Design
SPoC Code Side The PSoC will need to poll the IO_Stat_Reg and wait until it sees IORQ* asserted along with either CPURD* or CPUWR*. It should then read the AdrLowIn status register. Using this information, the PSoC should then perform the IO operation. ...

Power Supply Issues
Log from GPS Driven Clock
This clock has been operating just fine for the last 11 months until about a week ago. We had a power outage due to an electrical storm. When the power shut down, it oscillated on and off rapidly for about 30 seconds. Apparently, this fried the buck...