2145 Results for "3D printing"

Log 2: Test the 3D Model
Log from Personalising Apple's Magic Mouse
So I'm happy to report that the OBJ model I've attached to this project is pretty bloody accurate - after subtracting the mouse from this block in Fusion and printing - the block fits onto the mouse as expected. The internal ridge lined up perfectly...

3D printed body
Log from Tote HaD
Hey all, @davedarko writing. As you might have seen at the #Hackaday | Belgrade event - I've brought my Tote with 3d printed legs along to the workshop. There I was asked for the files and @Radomir Dopieralski told me I could share them in a log. It...

3D-printed parts with no flat face
Log from Funkey Zero
3D printing is a great technology, allowing people to prototype 3D parts at a minimum cost. But like all technologies, 3D printing with a Fused deposition modeling (FDM) has its own limitations, different from other techniques to produce 3D parts,...

Pollution Monitor meets 3D Printing
Log from Portable environmental monitor
The portable environmental monitor is finalist in both categories of the Hackaday Project, Best Product and the GrandPrize but the development doesn’t stop here. We’ve managed to put together a complex piece of equipment that also has an appealing design....

3. 3D printing
Log from Solar-Powered Tech Fashion - SolarCycle&Microsoft
There are jackets with solar panels on them currently in the market. But they all have the solar panels flat on the back. Does it actually collect enough sunlight when they are vertical? I wanted my solar panel to face the sun. Since this would make...

3D printing the case - part 2
Log from Wearable Raspberry Pi personal assistant
So, I've been ill for a while. I like to think I'm feeling better. The project must go on! If not - what's going to remind me about pills I need to take on time and food schedule I need to keep on?from left to right - power module, display module, main...

The 3D Printed Case
Log from Digital Magic 8 Ball (Mk.2)
So in a similar design vein to the programmer's converter dookickie I made a little while ago I decided to design a little bottom shell to house the bare pcb. For simplicity's sake I wanted to have a friction fit with no glue or fasteners required. To...

Lesson learned: ABS is for LEGOs and 3D printing, NOT for antenna masts
Log from Near-vertical Incidence Skywave Antenna
Version 1.0 of this was going to be a super-portable, lightweight design using three 5' sections of plastic pipe. I chose 1-1/2" ABS pipe because it was locally available, I could get a cap fitting with a flat top, and the matte black finish had a tacti-cool...

06.09.2015 – 3D printed box with logo
Log from Sit.Up
I thought the project needs a custom box, nothing special. Since my 3D printer cannot print more than one colour, I had 2 alternatives to colour the embossed text on the box: markers and pause printing and swap filament. The double filament method makes...

All the 3D parts, checkup to see everything fits nicely :)
Log from 'Thor' robot with addons and GUI
All parts of two weeks printing, at last job done :) (special modified parts included)Base parts (wrong motor viewed, sorry)This time with correct motor !Everything fits correctlyLooking good! This one has been modified, height has been smaller then...

Update 1: User Controls / 3D-Printed Case
Log from NeuralPi
Update: Milestone 2 for user controls has been implemented in NeuralPi v1.1. The NeuralPi hardware can be controlled over a local WiFi network using a remote instance of the NeuralPi plugin/standalone app. Controls include model select, EQ, gain/volume....

3D Printed prototypes before injection molding
Log from FunKey project - All your games on your keychain !
Introduction FunKey's design has been completely rethought. It is now sturdier, slimmer, with an active hinge that puts no stress on the cables and most importantly thought for production. We have designed every component while thinking about the injection...

New 3D-models
Log from FATCAT: Altoids Tin Mod Tracker
As I discussed in the previous log I've decided to modify the build to fit the speaker below the PCB, instead of gluing it to the lid of the Altoids tin. The first thing to do was to determine how much vertical clearance inside the tin I had...

OS 3D Printed Tabletop Reading Lamp
Log from 3D Printed Opensource Lamps
December 29, 2021 | Applied Technology Lab We finally finished the first prototype of a tabletop reading lamp.It's similar to old-school banker lamps or library lamps but very simplified and in the process of being optimized for 3D printing. I say optimized...

Introduction: 3D Printed Electrical Components
Log from Opensource 3D Printed Electronic Components
March 1, 2016 | ProgressTH 3D printers sit there, with a spool of filament, just waiting for you to come up with an idea or a need to fulfill with a printed component. With a few other common supplies usually on hand either in a public or private makerspace,...

|<
<
1
2
3
4
5
>
>|