30531 Results for "㎛ 시알리스 효과없음 ┶ vzx423.top ▧ 미국정품아이코스맥스 구매대행 ㆌ 정품아이코스맥스 정품가격 └ 여성흥분제 가격"

Top 100 of all 2015 Hackaday Prize entries
Log from Analyzing the Hackaday Prize 2015
A quick and dirty Top 100 by copy/paste the projects webpage text, then arrange the data in a spreadsheet pivot tableGrand TotalsAuthors: 672Projects: 910Comments: 3 169Skulls: 7 947Followers: 22 421View Count: 1 544 197Top 100 projects and authors,...

22nd August: They're here!
Log from WildDrone Locator
I am back, and so are the PCBs: Fig. 1: Top (left) and bottom layer view. Fig. 2: Bunch of PCBs. The components will arrive tomorrow. Time to fire up the soldering iron!

Cavity Parameters
Log from EMDrive/satellite
Many people asked for detailed cavity data:Height 24.37mmDiameter 1: 29.64mmDiameter 2: 16.12mmSmall dameter top edge to centre of injector: 5.60mm

Top of the tree
Log from WS2812 Christmas tree
Now I have added the 193th LED at the top of the tree. A WS2812 8mm LED from Adafruit, which I have ordered a long time ago for testing purpose. After some try and error I figured out, that this LED needs RGB byte order instead of GRB like the WS2812...

PCB TOP Assembled (part 1)
Log from Open Source All-In Drone-Droni SAME70Pi (Kopernik)
I assembled the following parts of the PCB TOP:- the SAME70-M1/M2 circuits- the headers of the xBees- the connector for front sens- the RPi Cams connectors- the Raspberry Pi compute module socket and circuit- the radio Si4464

Enclosure
Log from FireBreakNet
I've drawn out a basic concept for the enclosure in OnShapeThe enclosure consists of 4 main parts. The base slides onto the metal bracket, and has a opening in the bottom for the humidity, gas and particulate sensors to sample the air without directly...

Fabrication and assembly is underway
Log from Otter Force One
The tubes for suction and the hull have arrived, along with the cut pieces for the device. Brackets, mounts, and structural elements are being 3D printed around the clock. Let’s take a look at what has been created so far: Coupler The coupler routes...

Cold and Hot Water!
Log from Big Old Bus RV Conversion
Got water heater, hooked to extension cord and on top of my mini-fridge in this pic. (Update 2-16-2015)This weekend I moved the water heater to a more secure location on top of the wheel well, while it seems like that may not be a stable location, I...

Final PCB design
Log from LiPo Charger + Boost
The idea was the once I finalized my design, I would order the PCBs from OSH Park.Given the size was 1 inch by 1 inch, it was the most cost effective as I was $5 shipped to Australia.Top layer of my PCB, I have hid the top overlay.Bottom layer of the...

Producing the uRADMonitor - the aluminium enclosure (2)
Log from Global radiation monitoring network
One of the previous posts shared some details on the rugged aluminium enclosure production. You can read it here. It was a long road from the drawing board to the production, but the cases are finally ready. Combined with the rubber gaskets, we have...

Finish
Log from Straight wire and tube stock storage
After it was all finished, I loaded up the stock, and used labels on strings to label the dimensions. I think it is easier to roll if all the larger stock is on one end(I made the pockets that way too) because it is easier to start rolling, and it ends...

Final Assembly
Log from MacroPad With Tile Holder Buttons PCB Edition
As with my previous MacroPad, I laser cut a piece of 3 mm acrylic (red) to fit into the top panel. This makes a big difference in reducing the grating feel/noise when pushing in a Tile Holder Button. Mount the laser cut button guide into the top...

Lighting and space is still an issue.
Log from Building a workspace
I'm finding myself spending a lot of time rearranging things as I move from a soldering project to an oscilloscope project and back.The latest change I made is to stack one table on top of the other and mount a 2 Foot long fluorescent light under the...

Finishing Moves
Log from Kitchen Work Table
Taking an inordinate time between glue-up and final product, I finally managed to get the finishing done. You might be able to tell in the photo below that my shoddy joinery is on display on pretty much every corner due to using the wrong tools and being...

Pegboard Marble Run, Part 1
Log from Barb Makes Things
A few weeks ago, I did a build for reDiscover Center that's a big pegboard for a modular marble run. The top of it is too high for the kids to reach normally, so we're creating some elements that will remain fixed up high with a couple mechanisms to...

1
2
3
4
5
>
>|