2746 Results for "3D printing"

3D Printed Weatherproof Enclosure
Log from OpenDendrometer
I have always thought of FDM 3D printed parts as somewhat porous. As though defect holes in the wall of the part are inherit to the hobby level 3D printing process. I assumed that some kind of sealant would need to be applied to achieve...

Making 3D Printed Enclosure
Log from SOLAR POWERED WIFI WEATHER STATION
Designing the Enclosure :This was the most time consuming step for me.I have spent around 4 hours to design the enclosure. I used Autodesk Fusion 360 to design it. The enclosure have two parts : Main Body and Front Cover The main body is basically designed...

Making boards with 3D printers
Log from How lions etch PC boards
There are a few new methods of etching boards with resin printers. 1 method is to create a single protective layer of resin on top of bare copper. The mane challenges are evenly spacing the copper from the LCD, completely cleaning the uncured...

3D printing Sugar in more detail
Log from My machinery 2021: Direct Granules Extruder
My lazy Sunday afternoon project of 3D printing sugar is followed by a more in depth view on what can be done with that exotic material and what can't be done:Sugar isn't plasticsDue to a different chemical composition, the physical properties of sugar...

3D printing wishlist
Log from Silly hardware wishlist
With a 3D printer finally in the lion kingdom, it's time for a wishlist.F-35 nozzle ✓ Hotshoe for microphone ✓ PC board pliers for etching wide boards. ✓ Gopro mount for carbon fiber rod✓ Gopro mount with servo panning✓ Ambidextrous...

Manufacturing - 3d Printing & Laser cutting
Log from Robotics Ground Control Station
The first step towards building this project was 3d printing the parts at home. I used grey and yellow PLA, with a nozzle of 0.4 mm and layer height of 0.2 mm. The first bunch I printed and assembled looked like this. The RJ45 port is a female-female...

3D-printed parts with no flat face
Log from Funkey Zero
3D printing is a great technology, allowing people to prototype 3D parts at a minimum cost. But like all technologies, 3D printing with a Fused deposition modeling (FDM) has its own limitations, different from other techniques to produce 3D parts,...

Pollution Monitor meets 3D Printing
Log from Portable environmental monitor
The portable environmental monitor is finalist in both categories of the Hackaday Project, Best Product and the GrandPrize but the development doesn’t stop here. We’ve managed to put together a complex piece of equipment that also has an appealing design....

3. 3D printing
Log from Solar-Powered Tech Fashion - SolarCycle&Microsoft
There are jackets with solar panels on them currently in the market. But they all have the solar panels flat on the back. Does it actually collect enough sunlight when they are vertical? I wanted my solar panel to face the sun. Since this would make...

Better robots through 3D printing
Log from Ultimate running aid
It's been an incredibly noisy decade with those tamiya transmissions with spur gears. An earlier rover used a direct drive power system to reduce the noise. That proved impractical because of the fragility of the motor bearings & the low...

3D printing the case - part 1
Log from Wearable Raspberry Pi personal assistant
Wearable assistant is getting a nice black 3D-printed ABS shell. It seems to be sturdy enough, and a little bit of dremelling helps with most problems. With new case, comes the new mounting system. It's going to be mounted on a fabric belt or even two...

UPDATE 1: 3D model of enclosure
Log from Open UpCell
Today, we have 3D modeled the first version of the enclosure for our project to make its usage and storage much easier without damaging the components and connectors on the bottom side. As it can be seen in the image there exists a lot of delicate components...

Lesson learned: ABS is for LEGOs and 3D printing, NOT for antenna masts
Log from Near-vertical Incidence Skywave Antenna
Version 1.0 of this was going to be a super-portable, lightweight design using three 5' sections of plastic pipe. I chose 1-1/2" ABS pipe because it was locally available, I could get a cap fitting with a flat top, and the matte black finish had a tacti-cool...

3D Printing Custom Part for Solution #1: ADAS - CAS
Log from Multi-Domain Depth AI Usecases on the Edge
For Solution #1: ADAS - Collision Avoidance System (CAS): For the need of assembly, a LIDAR mount had to be 3D printed so that RPi can be attached to LIDAR and mounted on a car. Part of the mount design is taken from the STL files obtained from here....

3D Printing the Track - The Tedium ^^
Log from P.A.L. - Self Programming AI Robot
8 sets.... that is the number of times I need to print for the track. I am going to attach the file to the files location as soon as I am done. The file contains a single part for now. I will design and print the sprocket soon. Each of the parts is mounted...

|<
<
1
2
3
4
5
>
>|