8727 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

November 2014 - Designing a prototype source pt. 3
Log from Low Cost X-Ray Systems for Developing Nations
Around the end of October, I finished up the design of all the plastic components which would house the electronics of a 200W x-ray system. It was now time to design those electronics!Back in September, I had an idea of how I should go about doing this....

Everything Uploaded
Log from Highly Configurable 3D Printed Helmholtz Coil
Everything is now online for the project, completing the build of a 3 Turns x 30AWG 21cm coils and onto testing.

Bringing Up GDEY042T81-FT02
Log from FLOSS Book Serving System
I'll skip to the happy ending. I can drive the display, the back light, and can read data from the touch screen, but achieving those milestones took much much longer than it should've. This update won't have much info on the actual e-reader project but...

Module 1/TCD1304AP Complete/Module 2/AD7667 Complete
Log from DAV5 V3.01 Raman Spectrometer
Well exactly 98 man hours later, (avg. 14hrs per day*7,) and These are the 2 primary modules and I included the CLI (communication link interface) I had to make this so I could connect the CCD module with the ADC module.This is the CCD module (1) This...

A guide on powering Pi Zero directly from LiIon batteries
Log from ZeroPhone - a Raspberry Pi smartphone
At the project's beginning, when I was writing the "Features" section in the project's description, last entry was "Tons of Pi Zero-related hacks that were discovered along the way, that I'll share with you as the project goes =)". I didn't actually...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

The PCBs have arrived
Log from xmas_v2
Yesterday I have finally received my completed PCBs from ITEAD Studio! They are kind of rough around the edges, but they appear to work. I also received an additional 9 boards, from my 20 board order.During the time since the last update, I have received...

Perfect (sorta) V3 Boards
Log from Wireless BLE Kinesis Advantage (Custom Controller)
Soldered everything down and everything is functionally perfect. Only minor issue is I forgot to remove "i2C Pullups" from the board silkscreen but other than that, the boards are good to go. I actually still have 4 spare since the first one worked...

Ground truth torque testing
Log from K3lso Quadruped
Ground truth torque testing for #tmotor AK10-9 and #mjbots #moteus I didn’t dare pushing it further today when everything started to lift even if I tried to hold it down by hand. 😅 #k3lso #quad #quadruped #robotics #bldc

Automatics!
Log from N.I.T.E (Nissan Industries Two Eighty)
Automatic windows are installed -- everything still needs to be cleaned up and the doors need to have the interior piece fabricated -- but the electronics work, and that's the important part!So to date:1. Automatic Locks = Installed2. Automatic Windows...

Aw Nuts!
Log from TOME - Portable 3D Printer
Before prototyping the second half of the Z-axis clamshell I was waiting for a McMaster order to arrive. Today it came and I was able to get everything to fit, primarily for a form/fit/function verification. Now that I know everything fits appropriately...

Ditching the Blue Box
Log from smoothieware-powered 6040 CNC Mill
I tried to work out how to fit all the components inside the blue box, but decided that it was just too crowded. Instead, I am going to mount everything on a 24" x 12" wood backboard. Also will make two aluminum panels, one...

Mechanical arrangement
Log from GPS (or not) chime clock
I thought long and hard about how to mount everything. The big issue is that the solenoid throw is parallel to its longest dimension. Unless I wanted to try and make some sort of hinged hammer this meant mounting the solenoids at a right angle to the...

1
2
3
4
5
>
>|