Close

8727 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

  • Removing undesired reflections/spots
  • Log     from Open Indirect Ophthalmoscope
  • Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

  • And... Done?
  • Log     from Breadboarded 3-Axis Sine-Cosine Controller
  • Schematics and code are posted in the Files section. Had a dial indicator attached to an X axis cobbled together with regular threaded rod, with my PC moving it to and fro. The GCode had it moving +/-0.1 inches, and that is what it did. I'll check back...

  • G28 - Homing
  • Log     from X printer - portable
  • Here is a video of the homing procedure. X and Y are homed sensorless and Z with an regular endstop. With the help of Uzair Patel I was able to solve the non-linear Z-Axis firmware problem. I decided to use marlin 1 instead of marlin 2, because marlin...

  • X-Axis
  • Log     from OpenLRC - The low cost linear rails CNC
  • The x Axis is the exact same as the regular Spinx. I printed the plates in Black Amazon basics Petg with 5 perimeters and 100% infill. I used 3d printed rail aligners to temporally install the linear rails. Im using MGN12H knockoffs off alibaba....

  • Overview
  • Log     from Relay Logic Clock
  • Schematically the clock consists of four Johnson counters, cascaded together to count and display time in 24hour format. I chose Johnson counters instead of regular binary counters because the decoding to seven segment requires less logic gates than...

  • (NOT) Fake!
  • Log     from 68040 upgrade for Powerbook 520c
  • Well, that's the end of that. My 68040 is most definitely a fake. Looks like they took a 68LC040, took off the markings, and printed or lasered on fake ones.--- NONONONO! ---MC68040EC33V does not contain an FPU, despite no 'LC' designation! Arrgh!!!http://www.cpu-world.com/CPUs/68040/Motorola-MC68040FE33V.htmlI've...

  • V.StillTinkering - 2015
  • Log     from Bellcycles: A New Take on the Bicycle
  • First item on the list of things to fix from the first version of a bike was the gearing. That version had a direct connection between the pedals and the wheel hub. So for each pedal rotation so goes the wheel. From the last post you can...

  • Day #2, 11th Feb
  • Log     from S.T.E.A.M. FABRIKARIUM
  • Day #2 at the Fabrikarium started off with a quick recap of the various projects to help the participants decide the one they would like to build. Everyone listed out their skill sets and choose a project to work on, followed by some interesting skill-mapping...

  • Tinymovr September-October update
  • Log     from Tinymovr Motor Controller
  • We've released a new firmware that implements read-write CAN endpoints, which we call "one-shot" endpoints. Up till now, endpoints in Tinymovr were able to perform either read or write operations; for a write operation, studio transmitted a regular CAN...

  • PC-FX interface
  • Log     from BlueRetro
  • I added PC-FX support with version v0.14! Regular pad and mouse are supported. Any mix of devices is supported for up to 2 players! Refer to wiki for cable schematic and config documentation. The low level protocol is pretty much...

  • Donor Cabinet work
  • Log     from Star Trek: The Mirror Universe Pinball
  • 7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday