27 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

Remapping the Keyboard
Log from A DIY Keyboard
Remapping the KeyboardGiven most of the work is done with the "basic shift logic" how hard could it be?The basic shift logic:Well much harder than expected, here is the schematic:Now many will recognise this as a PLA (Programmable Logic Array).Designing...

Report Descriptor
Log from TM4C1294 USB Host for Logitech Extreme 3D Pro
Report descriptor (packet) structureByte.BitFunctionDescription0.7X7analog value X LSB0.6X60.5X50.4X40.3X30.2X20.1X10X01.7Y5analog value Y LSB1.6Y41.5Y31.4Y21.3Y11.2Y01.1X9analog value X MSB1X82[4:7]H[1:4]hatswitch buttons2.3Y9analog value Y MSB2.2Y82.1Y72Y63[0:7]Rzanalog...

Waterproofing
Log from Axiom: 100+kW Motor Controller
Going for IP67 Something I learned through the path of enclosure design after our last mentor session with Eric Weinhoffer, is the nitty gritty of enclosure sealing. So our target customer needs a water resistant motor drive, and to be on the safe side...

Cathode ordering
Log from MS6205 graphical mode
I replaced most of the logic board with an Arduino Nano. The only original parts used on the original board is the 12V→240V DC-DC converter, and traces feeding the 5V power through the board. After connecting I checked that shifting values into the anode...

The Design
Log from NE555 Dice Inversion
Bringing the NE555 into the future also means using modern tools. We'll describe the functionality of the dice in VHDL and use PCBFlow to synthesize the digital description into an implementation based on NE555 logic. At the same time this will also...

And one more thing II
Log from NE555 Dice Inversion
Yann pointed out in a comment that a Johnson counter may be a good way to save some gates in the logic implementation of the dice. Currently a simple binary counter is used.To be honest, it seems that I mistakenly thought of Johnson counters being simple...

Synthesis and Technology Mapping
Log from VHDL/Verilog to Discrete Logic Flow
This is where things get a bit more interesting. I was concerned that it was quite difficult to coerce Yosys into using my custom gate libraries, but in fact it was rather easy. The "cmos" example proved to be an excellent blueprint to creating a custom...

Arduino Sketch
Log from Happy Halloween 2015
// // Happy Halloween // by Hari Wiguna 2015 // // 01 - modify to work with Chinese knockoff // 02 - Draw Happy Halloween & Pumpkin Face // Wiring: // Arduino A4 --> OLED SDA // Arduino A5 --> OLED SCL // Arduino D2 --> OLED VCC // Arduino Gnd--> OLED...

It's aliiiiive! (for real, this time!)
Log from USBiano Mk. I
Well, if this project wasn't in "hack territory" before – despite an actual hacksaw already having been part of the process ;) – it's definitely there now!Yesterday, I removed all 32 "anti-ghosting" diodes, and reinstalled them the other way round (except...

Backplane
Log from Old school IC tester
I decided that interface between ZIF-socket and host machine will be implemented with help of this antique ISA backplane manufactured in 1984 (I bought it for about $20 last month):I cut out it a little to remove part with pull-up resistors, because...

Project Log 6: Release the PCBs!
Log from OS3M Mouse
Ah, home at last. After spending so long in the mechanical world, I almost felt disconnected from my electrical roots (ba-dum-tss). Corny jokes aside, it has been really nice to get to dig through datasheets, lay down some traces, tear through app notes,...

Slimmer arms for 3" kinematic actuator
Log from Gaming Robot
Earlier I mocked out some arms to be used with Dynamic Actuators which are about 4" in diameter. There are 2 problems with the arms. Firstly the torso with 4 actuators is a little heavy for dynamic actuators. Secondly, the arms look a little husky. Recently...

Figuring out why the CM4 wouldn't boot when attached to my board
Log from Put a Raspberry Pi CM4 into an original iPad
In my previous log entry, I had fried my CM4 by shorting 5V to 3.3V, so I had to order a replacement, which arrived last week. The next thing for me to test is whether I can boot the CM4 on my board, so I installed Raspberry Pi OS and set enable_uart=1...

Figuring out why the CM4 wouldn't boot when attached to my board
Log from [HDP 2022] Put an RPi CM4 into an original iPad
In my previous log entry, I had fried my CM4 by shorting 5V to 3.3V, so I had to order a replacement, which arrived last week. The next thing for me to test is whether I can boot the CM4 on my board, so I installed Raspberry Pi OS and set enable_uart=1...

RTFM
Log from AND!XOR DC28 Badge
Read The F-ing Manual Made with beer and late nights in California.TLDR: This year's badge provides bling, an embedded CTF text-based adventure, and a port of MyBASIC extended to the hardware to make it hackable.AND!XOR (@andnxor) * @zappbrandnxor *...

1
2
>
>|