Close

9824 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • R2 - update 1
  • Log     from OpenGen – OSHW handheld wave gen
  • R2 of OpenGen has been going well so far. I have made plenty of changes: I will need a four-layer board for the fast analog parts, which provides easier power supply routing and much better grounding. However, they're expensive and I don't need one for...

  • New Board Developed
  • Log     from PixiFlood
  • Its been a while since I reported on what was happening with the Pixiflood board.  I wanted to expand to powers higher than 10w and had created boards to support 20w and 30w leds that only required 24 volts which was within the component specs.I've...

  • Limited GPIO? Hardly.

  • Log     from ESP8266 DIN 8-Channel Wifi Relay Controller
  • The first step when beginning this project was dealing with the limited IO pins on the ESP8266 modules. The ESP-07 and ESP-12 modules break out all of the useful pins. A number of pins needs to be pulled high or low during power on so it boots off the...

  • The Inevitable Design Oversight
  • Log     from Weather Display
  • It was my intention all along to use two or three RGB LEDs per segment of the weather icon. The TLC5940 is perfect for driving multiple LEDs—constant current outputs capable of sinking up to 30 volts. But of course this assumes discrete LEDs. Common...

  • New GPS receiver
  • Log     from GPS Clock
  • Well, between the pandemic and the fire at the Japanese oscillator factory, SkyTraq has told me that they're going to have to EOL the Venus838LPx-T module that I've been using in damn near everything. I've got about 120 of them left, so there's plenty...

  • System Summary - Revised
  • Log     from Climate & Environment Monitoring Station
  • A quick overview of the revised plan for the system is required. Here are the changes since the first one: Wireless support has become ubiquitous due to the low cost ESP8266 and ESP32 boards.Raspberry Pi boards are now capable of routingField installation...

  • Festive Blinkenlights
  • Log     from Tindie Dog Park
  • Gearing up for Diwali, Hanukkah, Christmas; or just use that magical time of the year to indulge your blinkenlight machinations - if you've not started planning, now is the time! According to Bill, you're already too late for grand architectural illuminations,...

  • A bigger display
  • Log     from NES Ledtris (LED Tetris)
  • A few months ago fellow hackaday.io user [Steve] has created his very own Ledtris display. He used a slightly different construction to my original display, also using laser cut parts. After some troubleshooting we got his display to work. Steve did...

  • C Compiler working
  • Log     from MARK-II
  • Today, I compiled simple C program with vbbc and then ran it on MARK-II successfully. So I finally have C compiler for my CPU! Of course, there are a lot of bugs and there is plenty of work left, but, it simply works! Next goals are: Port some C standard...

  • Cube construction
  • Log     from LED cube using charlieplexing
  • In a perfect world I would have done the assembly with some kind of jig. I will probably have to look into that if/when I build another one. As it is I just bent the LED leads flat to the bottom of the LED and at a 90 degree angle to each by hand in...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday