4758 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

Success!
Log from Garden Shed CNC
I finally got the drifting problems sorted out! I added a lot of data logging to the code and spotted the switch bouncing when I ran it drawing circles over and over.[(98)=100][(82)=84][(101)=204][(116)=118] [(103)=105] [(0)=183] [(40)=42][(133)=214][(87)=89][(103)=150]Its...

C-ving
Log from PEAC Pisano with End-Around Carry algorithm
OK I thought that the amount of data in the future would be too large and I decided to do the sieving in C. Using the available scanning data, I could only go up to 2161 : n1=46 and n2=2114.The first hicup comes at 1511 so there is no point in dealing...

Delta coding and some stats
Log from PEAC Pisano with End-Around Carry algorithm
With the new harvest, I estimate that the perfect and maximal orbits under m=1M is around 100K. This starts to make quite a large .h file to include in the sieve generator. Not that it's such a concern but scalability, you know.... And embedding such...

Three Blobs in the Bush and Nothing in the Hand.
Log from Livestock and Pet Geofencing
I have racked my brain in search of a way to get the blobs to run on the Oak-D Lite. I tried to use the Depthai SDK and API. The code I used is available on our project's GitHub repository. The Intermediate Representations (IRs) and blobs are available...

ROM checksum code
Log from Re-UD-80 - a larger display for Epson PX-4 / PX-8
The 5.21E ROM works file with the current board, but the 7.11A ROM uses a different pin for the vertical sync signal. This can be fixed, but then the 5.21E ROM results in no display. Rather than fixing the hardware (with a jumper to be changed when the...

Scientific papers on tree tomography, Part 2
Log from Exploring the internals of trees with sound
First paper: Elastic wave modes for the assessment of structural timber: Ultrasonic echo for building elements and guided waves for pole and pile structures (DOI: https://doi.org/10.1007/s13349-014-0087-2, though that goes to a paywalled copy) by Martin...

FarmBot Genesis V3
Log from FarmBot - Open-Source CNC Farming
FarmBot Genesis V3 exhibits the following changes from Genesis V2: Updated bracket design to minimize the number screws needed, making assembly easier and faster and decreasing the number of partsSimplified cross-slide design combining 3 plates into...

Choosing the UV LEDs
Log from UVA
LEDs come in all manners of sizes, colors and brightness. To be able to choose the most appropriate ones, we need to know what are they going to be used for. For this purpose, we did some market research on UV curing glues. After checking the datasheets...

CylinDraw Can Draw on Paper!
Log from CylinDraw: Rotary Plotter & Engraver
Announcing a major new capability: CylinDraw makes for an excellent paper plotter! The hardware needed to enable this capability only requires the addition of a large tube to wrap the paper around and two rubber bands to secure the paper in place....

The Case of Cases
Log from D-DAQ
See Update BelowContext being more that of the puzzle of cases not one case "to rule them all," but I digress. The past week I've been going through a few catalogs to find an enclosure for D-DAQ's mainboard. Previously, the PCB's form factor was based...

SATA, DDR3, Verilog Visualizer and Other Stuff
Log from Nysa: FPGA Development Environment
SATA StatusAfter weeks of painful debugging. I have been able to read and write to the hard drive!I ran into an issue though... the speed at which I can communicate with my FPGA to/from my computer maxes out at about 16MBs and the hard drive reads/writes...

A detour to the Pano Logic G1 (1) - LPDDR
Log from VerilogBoy - GameBoy on FPGA
As I have mentioned in the previous update, I am still having some trouble with the MIPI-DSI. Currently I do not have access to any soldering tools, so the plan of making a new revision of prototype need to be postponed. In the meanwhile, I thought it...

Analogue Wind Vane With Auto Set Up
Log from Arduino GPRS IOT Weather Station
As the amazing online GPRS Weather Station project continues, we have yet another upgrade to the vast array of sensors with a professional analogue wind vane, kindly donated by Vector Instruments. This device will eventually be hooked into the new, upgraded,...

Pt.1 Sensor Design and Prototyping
Log from WiFi-Enabled Visual Doorbell
Full video on this subject (this is literally the script): https://www.youtube.com/watch?v=Psy6lRcdGtk Introduction Old houses, like my parents’ home, comes wired with simple electromechanical doorbells. They’re a simple electromagnet with a metal...

Umbilical Tower Redesign
Log from Apollo Saturn V and LUT
I love it when I can find parts that someone else designed, it saves me time and effort. Aviator67 produced a treasure trove of add-on parts for the farscape1 LUT. After printing and assembling the Level30 floor framing along with the cable tray template...

1
2
3
4
5
>
>|