612 Results for "N 온라인손오공게임 CDDC7닷컴 ◆프로모션번호 b77◆용산카지노㈣월드컵예선경기생중계ᇭ하노버ᇡ토토신🍋온라인손오공게임강추 luniform/"

Part 2 of n
Log from Eagle parts, by family, using python
Last time, I successfully made a python script that made a single component, but that made several assumptions, first, i was already in the footprint editor with a named component. if i was going to make ~200 components i would need to open many new...

Part 1 of n
Log from Eagle parts, by family, using python
The goal of the project is to make a lot of similar components as quickly as possible using python. the first step was to understand how to do a single component using only the command bar. I'll write this log in the order I discovered commands, not...

ballscrews n stuff
Log from Grizzly G0704 CNC Conversion
whoopsmade a dent in the insulation and then bounced off across the roommmca and I (and mr pika) stripped the G0704 down to its barebones, making two piles of parts one for not getting reinstalled and one for reinstall. i won't go over it here, since...

part 3 of n
Log from Eagle parts, by family, using python
The humble header device in eagle. If you've made your own components in EAGLE you already know the process, if you havent (you should), there are 3 basic steps make footprint (for pcb) make symbol (for schematic) connect them pin to pin to make a device...

Operations: Z, S, U, R, N,
Log from Bit-serial CPU based on crossbar switch
Following stack operations have much in common: Turn all switches off (remember, MT8816 has a RESET signal so this can be done for all 256 at once, in one microcycle)Set up the 16*16 matrix according to the operation belowDrive all registers around for...

feature creep vol. {n+=1}: doors
Log from Minamil 3dp: another minimal CNC mill
Another log mostly about already-dead stuff that I took pictures of before breaking it down to make it different again. I tried to make this vulnerable corner at least not super fragile. It turned out to be super not fragile. It will take a much harder...

Design challenge n.5: what type of balancing resistors?
Log from Green BMS
Most of the low cost passive smart bms that are on the market, in my opinion they all have one limit in common: low balancing currents, from 30mA to 100mA Anyone who has experience with lithium cells, especially with Lifepo4, knows that with use, the...

Prelimary parts list
Log from Actobotics CNC Mill
This is a partial list of Actobotics parts used in this project: Y-AXIS 1x 12” aluminum channel, P/N 5854542x 3.75” aluminum channel, P/N 5854434x 90-deg angle brackets, P/N 5855324x 90-deg pattern mounts, P/N 5854941x 12” d-shafting,...

Just a test
Log from PEAC Pisano with End-Around Carry algorithm
While trying to estimate the size of the complete set of arc data for w32, I wrote dispatch_02.c and let it run for a minute or so...$ gcc -Wall -DWIDTH=32 -Os dispatch_02.c -o dispatch && ./dispatch Run on W32 from 42 to 1500 42 -> X=2656939159 N=5996278162...

Re-visiting Code from 9 Months Ago
Log from Autonomous Agri-robot Control System
Nine months ago, the machine was using a Pixy2 camera to track barcode labels thrown down on the ground. The machine would steer towards the label and then stop dead when the barcode appeared at a pre-defined location on the x axis. Furthermore, the...

Using the YASSD
Log from Yet Another Seven Segment Display
The YASSD is controlled via a UART connection, via a couple of simple commands, at a baudrate of 19200:To control what is displayed:ID,NUMBER\nSo if the display has an ID of 04 and you want to display 1337:04,1337\nA dot is no problem, just insert it...

Optimizing DSP
Log from FM-synth, two voice, Markov sequence, music box
This build started with optimizing DSP operations on 8-bit Atmel MCU. floating point is too slow, so i designed 16-bit fixed point arithmetic with optimized assembly language inline multiply. Exponential rise-fall dynamics are hard to calculate directly,...

waterfall from the past
Log from itanimulli code crackers
As blinkinaday noted, there is a second, different waterfall image from the wayback machine, that can be accessed here:https://web.archive.org/web/20150911223837/https://infotomb.com/uy6vy.pngThis project log is about deciphering the stego and FEZ code...

out of the blue
Log from itanimulli code crackers
Ok, so..@Kenji Larsen had offered help, providing the missing text from the empty text file "0dfz7.txt", which, intentionally or unintentionally, got lost and wasn't retrievable. The text content of the file was:pnlhcfpslerhzrgwpvyrvcspsxozrjwbeooakazviggsezhwihiheqgmtmlezwxwhich...

Reading from MCP342x [16bit Sigma Delta] I2C ADC
Log from Box0
IntroductionWe are going to connect and read data from MCP342x [16bit Sigma Delta] ADC.You can see more on the ADC hereNote: MCP3428 (x = 8) was used.ConnectionCH1+ = Signal+ CH1- = Signal- CH2+, CH2- = Unused (Floating) VSS = GND VDD = 3.3V SDA = I2C0.SDA...

1
2
3
4
5
>
>|