90479 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

Project is Shelved for the Foreseeable Future
Log from Telemetry System for a Human Powered Vehicle
Due to unexpected circumstances, I will no longer be continuing with the telemetry system on the Pedal Prix bike. As a result, this project will be shelved indefinitely unless some other members of the team decide to post further information as they...

Optics visualization in the browser.
Log from Arcus-3D-P1 - Pick and Place for 3D printers
I actually ended up modeling my optics with just cones and planes in OpenSCAD, but I also ran across this while doing my research. For something a little more complicated, this could be pretty useful.Thought I'd share it anyway. It's pretty neat. Ray...

Design of Comms Plugin: Laser
Log from Robot Communications Module
Well, we are going to need line-of-sight (LOS) for this! And hope that birds won't fly through the laser!Anyway, I'm just gathering some useful research on this at the moment:10m/500Mbps WDM visible light communication systems https://www.osapublishing.org/oe/abstract.cfm?uri=oe-20-9-9919...

Don't look down....
Log from Thrifty Pick and Place
The down camera is also smoked. Ordered a $10 replacement - this is a 7mm one with a 5m cable. Seems to go to 1024x768 and the longer cable will help - the old one barely made it out of the cable chain. 5m shoul dbe able to do that and follow the USB...

Closure printed
Log from PsychOctoprint
13 hours and 46 minutes to print the last part, 40mm/s, 0.1 layer, 30% infill.... Only to find out I forgot to update the button position as I had changed the pcb before ordering.... Anyway, the part looks nice, retro as I wanted... Gotta update the...

Hmm... Something something USB-Type-C Power...
Log from Project 3+Pi
Hmmm 100W MAX...Negotiable power draw.... Potential reduction of e-waste by using current on the shelf power supplies.Yup. I'm working on getting a power delivery mechanism working to allow USB-C Sink whilst taking advantage of that 100-60W power...

New boards arrived and assembled
Log from WiFi to 433 MHz bridge
I have assembled new boards. After testing I can say, they work as expected. My friend is designing 3d-printed enclosure. Looking pretty cool!Anyway I have discovered that my remote power outlets are designed really bad and I am unable to do anything...

Hello, I'm a SDR
Log from 74HCT6526
Or Serial Data Register. Even though it may be not very well known, it was meant to provide fast disk drive access on the Commodore 64 and Commodore 128. But for classical Commodore reasons, we were stuck with the old and slow bitbanging IEC...

prototype boards orderd
Log from OctoSonar FeatherWing
Actually ordered 0.0.2 board. Minor tweaks.The adafruit 0.1" headers have slightly smaller diameter pads than I was using on my headers - when I switch to the oshpark design rules all mine raised alarms at being to close to the edge. So I made mine match.Switched...

simple pendulum
Log from NSCE-ngbrain
I'm going to test first learnings making the typical pendulum test. But I have only 1 slave now (1 sensor=MPU & 1 actuator=servo). I need other slaves to offer more sensors (without actuators for this configuration).I wan't overload slaves making many...

USB HID is now report correctly
Log from Wac0m Rip0ff : Wacom I2C hacked!
I be able to get the STM32 to report the USB HID event correctly, But still can't move the cursor on both Windows 10 and Linux (Debian X.org). but for some reason, it's behaving like relative mouse on Android 11 (My Xperia 10 II). So anyway, the code...

Ported to Teensy++ 2.0
Log from Wac0m Rip0ff : Wacom I2C hacked!
two days ago, I ported the WacomRipOff project from STM32 to Teensyduino. And It works ! only change I've done is instead of using interrupt waiting to receive the data from w9013, polling is the way to go because the Interrupt on my teensy is buggy....

Rev4.0 PCBs are here!
Log from Fl3xWatchOLED
OSHpark mail package showed up today. It's long waiting rev4.0 Fl3xWatchOLED PCBs. Last time sadly no sticker came with pcbs, so I contacted OSHPark and they kindly includes tons of them. Anyway, here's some pics of them.

Boards are in
Log from Commodore 64 Diagnostic Dongle
Finally after a month the boards are in. That's today's shipping for ya. Anyway, I have some soldering to do. And I forgot I still need the two buffer chips and more terminal pins. I can at least get some of the ports...

Almost Done
Log from Warehouse 13 Tesla Gun
Getting close now. After testing getting everything into the 3d printed shell, I sadly had to give up on the sound. The speaker stopped working once I put it together and it wouldn't fit inside anyway. So no sound. But everything else is good. Going...

|<
<
3
4
5
6
7
>
>|