Mike12:30 PMRight. Did you implement the double-step initially, or only remember it later on? Simon Jansen12:30 PMThe film simplified it a lot. It's not a 'stick in the question - get out the answer' type machine. Simon Jansen12:30 PMNo, i knew about...
bitluni12:24 PMthe i2s has a maximum data rate it supports bitluni12:24 PMthe base clock can be like 40MHz bitluni12:25 PMbut the pipeline itself is a bit finicky bitluni12:26 PMit simply stops working at certain clock rate that's around 20Mhz bitluni12:26...
Chris Gammell12:42 PMI'm sure you have some you could share as well Paul Stoffregen12:42 PMhow much calibration sucks really depends on your production volume and how willing you are to invest the time & money to make it not suck Chris Gammell12:42 PM>...
Hey everyone -- just waiting a few minutes for Shahriar to log on The Signal Path12:00 PMI am here! BSA Secure12:01 PMWooHoo! The Signal Path12:01 PMDo you see my messages Dan? :) Ken Kaiser joined the room.12:01 PM Morning.Star12:01 PMHey hey...
Aaron Oppenheimer12:00 PMHi everyone!! Aaron from color+light here! Really excited to hang with you all today! sander joined the room.12:00 PM Boian Mitov12:00 PMHello @Aaron Oppenheimer :-) anfractuosity12:00 PMhey bylloyb joined the room.12:00 PM Psygantic...
Hi everyone, welcome to the last Hack Chat of 2020! I'm Dan, I'll be moderating again today for David Lovett, aka Usagi Electric, and we're going to be talking about Vacuum Tube Logic, or pretty much anything about vacuum tube circuits. David, can you...
OK folks, here we go. Welcome to the Hack Chat, I'm Dan and I'll be moderating today for Zack Freedman. We're going to talk about follow through on projects and actually finishing some of the projects you've got on your bench for a change. We're also...
OK, greetings everyone, let's get started. I'm Dan, I'll be moderating today along with Dusan as we welcome Tim Szeto from Nanoport Technology to talk all about haptics. I think we'll be hearing from Kyle, too, who's a mechanical engineer there. Tim...
Dan Maloney11:09 AMHi all, Hack Chat starts in about 50 minutes: Dan Maloney11:09 AMhttps://hackaday.io/event/181633-robot-dogs-hack-chat HACKADAY Robot Dogs Hack Chat Afreez Gan will host the Hack Chat on Wednesday, September 29 at noon Pacific. Time...
Andrew Sink12:39 PMI've made mechanical assemblies printed fully dense on the Mars 2 Pro, and shrinkage was not something I had an issue with Thomas Shaddack12:39 PMThe radical polymerization leads to sometimes fairly significant shrinkage. (Low single...
Dan Maloney12:00 PMGreetings all, welcome to the penultimate Hack Chat of 2021! I'm Dan, and as usual I'll be modding today along with Dusan as we welcome Erik Kokalj to the chat. Erik works on spatial AI at Luxonis, and we're going to go into depth...
Dan Maloney12:00 PMOK, folks, good afternoon/evening/morning to you all. We're ready to kick off the Hack Chat! I'm Dan, I'll be moderating today along with Dusan for Hackaday's own Al Williams! Dusan Petrovic12:00 PMHi everyone! Dusan Petrovic12:00...
Dan MaloneyApr-13 12:00 PMHello everyone, welcome to the Hack Chat. I'm Dan, I'll be moderating today along with Dusan as we talk about the 2022 Hackaday Prize with Majenta Strongheart. Dave BlundellApr-13 12:00 PMha_proxy is another good way of doing...
Prof. Jim Brenner12:49 PMYou mentioned https://www.celeramotion.com/microe/products/linear-encoders/. Which ones are you using the Nano / Optiras? Dan Maloney12:49 PM@Prof. Jim Brenner - We had Zach Tong on the Hack Chat not too long ago, he's interested...
Still Thursday or whatever, 21:22, 08/12/2022Thursday, 16:41, 15/12/2022 - it took me an entire week to finish this incomplete project log.Also, I will skip the part were I fix grammar mistakes, this Project Log is just so long that it is lagging...