Close

3885 Results for "%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EB%93%B1%EB%A1%9D%E2%9E%9Coptime4%E3%80%82com%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC %EA%B0%95%EB%82%A8%EB%A7%88%EC%82%AC%EC%A7%80 %E2%9E%9C %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%E1%98%AD %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EB%B0%A9%EB%B2%95%E1%98%AD %EA%B0%95%EB%82%A8%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B0%95%EB%82%A8%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Firmware hacking

  • Here is a rough schematic of the isolated bus circuitry. It looks like there is some shared "open collector" style bus on CH4 of the isolator, with D8 and (I assume) a pullup on the BMS controller board. But so far I've only ever measured this line being...
  • The Story So Far-- Explodophone 1.0 Part 2

  • Now for the other half. For maximum starting flexibility without taking the cost too high, I opted to go two octaves, using notes found on the white piano keys only, i.e., notes with only letter designations and no sharp or flat symbols. This means I...
  • First video out

  • It seems I have reached the base camp. The el-cheapo 7-inch LCD monitor on the right is connected to the output port of my breadboard TTL computer. The computer is now running at 6.3MHz and runs a software loop that generates a VGA test signal. The colors...
  • Directory Stuff

  • I put a bunch of files on the SD card so the directory spans across multiple blocks. It might be fun to have a directory listing. The front of the first directory block has: 000 42 20 00 49 00 6E 00 66 00 6F 00 0F 00 72 72 00 B .I.n.f.o...rr. 010 6D...
  • Atari 2600 Bankswitch Cartridge

  • The Bankswitch cartridge implements the three most common schemes named F8, F6 and F4. The working of the bankswitches is depicted on the table below. Address -Address Lines-- Bankswitch/Bank selected 1 11 8K 16K 32K 2 1098 7654 3210 F8 F6 F4 $1FF0 0001...
  • B1+B2 completed. Also, facing my first real problems.

  • Finally, B1 and B2 are completed and they.... kinda work... Although I'm going to have to check quite a few things.Remember how B0 performed flawlessly, both when connected via the expansion port, and when replacing CIA#2? Well, that's no longer true....
  • Rubik's-Cube-Solving-Robot

  • Rubik's-Cube-Solving-Robot Abstract Rubik's Cube, a 3-D combination puzzle invented by Ernő Rubik in 1974, is the World’s top-selling puzzle game and best-selling toy. Rubik's Cube is surprisingly complex, there are 43,252,003,274,489,856,000 permutations...
  • Topology (1)

  • In this post I want to share how I selected a suitable topology for the resistor network that will be the core of the programmable decade resistor. Although I did some online “research”, the following criteria determined my choices: Switch...
  • rf24boot: A huge update

  • There hasn't been much going with rf24boot for a while, till I was playing with esp8266 and accidentally writing frankenstein firmware for it. Despite being cool and cheap, esp8266 still consumes way more than nrf24l01, so I'm back to rf24boot. This...
  • Solder the LiPo battery

  • You will need a Lipo battery with 100mAh capacity, you can get a higher capacity one but take into account that more capacity means a bigger battery so it won't fit into the board, the battery must have a protection circuit included. The battery must...
  • Board NEDONAND-6

  • NEDONAND-6 is 8 multiplexers 2:1 with common control (straight select and inverted select):Board already ordered through OSHPark:Pins description:1.1) GND - ground 1.2) O0 - output of multiplexer 0 1.3) O1 - output of multiplexer 1 1.4) O2 - output of...
  • A lot of googling to start.

  • The first thing I did was try and find a device that could do what I wanted. I found this https://www.digikey.com/product-detail/en/maxlinear-inc/XR28V382IL32-0A-EB/1016-1974-ND/4515332 which should be exactly what I need. Its too much of a device for...