So far I've designed a 3D enclosure using SolidWorks. The bottom will be 3D printed for now, and any errors can be rectified before going for an injection mould. The top plate will be laser cut and engraved in translucent acrylic, and added .Figure:3D...
[Here] is the chip I'm using. Below is the symbol I just made: Now to make the footprint and 3D model... Hmm? I wonder if I could've used this to create the BMI160 footprint... The 3D pads are understandably wrong, but it looks like there's promise with...
Friday, 13:25, 02/12/2022 - Yes, "02/12", it took my two days to finish this Project Log since I had to rewrite it time and time again.At first I thought this was a waste of time, but after doing this, I feel like I have a better idea...
As I found in the last post, the isolated UART bus daisychained through the Tesla modules is running at an odd frequency, 612,500bps. This is problematic as it is not a standard PC baud rate. I had an FTDI board lying around so I had a peek at the datasheet...
Hello, today i wanted share some detailed overview of modules, how they built and more importantly how they communicate with main controller, it's significant as standarized communication interface is something which make possible to easily extend...
Thursday, 16:41, 15/12/202220/12/2022Sorry for the delay, for some reason my brain refused to work these last 5 days, so I didn't work that much on this project log as I wished to. 23/12/2022 For some reason, it seems like this Project log is so...