2881 Results for "《 예약문의 OIO↗8489↗8306》가라오케추천τ가라오케edition선릉가라오케⇒가라오케추천seek 강남가라오케и가라오케а가라오케사이즈ψ㏉청담가라오케confirmation"

Sentry water gun (lidar tracking!)
Project by Marcel
This high tech water gun will track persons with the lidar sensor and fire several shots of water
- 106
- 101

LED Stand Lighting - Sound Reactive - ESP8266
Project by Ron O'Sullivan
Sender/Receiver LED Sound Reactive Light Stands ESP8266 Arduino (No longer using a SP107E)
- 2
- 1

TTL Operation Module (TOM-1)
Project by Tim Ryan
A 16-bit TTL CPU and stack machine built out of 7400-series chips.
- 19
- 20

4 Bit TTL CPU
Project by Tim
A TTL CPU I built a long time ago when I bought a huge stock of NOS TTL chips on ebay
- 14
- 17

Vectron VGA
Project by Nick Bild
Vectron VGA generates a 640x480@60Hz 3-bit color VGA signal and is designed to interface with the Vectron 64 6502-CPU based computer.
- 11
- 16

How to DIY a Four-axis Aerocraft at Home
Project by Catherine Sui
This article will show you how an amateur will do a Four-axis Aerocraft
- 8
- 6

PIERCy-1 - ZX Spectrum +2 Raspberry Pi Mod
Project by Raphael
Transforming a broken ZX Spectrum +2 into a battery powered cyberdeck of sorts with display and custom macropad
- 794
- 11

Mobile Phone Detector Circuit
Project by mbsg99
This is Mobile Phone Detector System which is designed on KiCAD software and printed PCB is bought from JLCPCB.
- 3
- 1

Open assistive robotic arm for meal
Project by Julien OUDIN
An accessible robotic arm designed to help people with special feeding needs.
- 63
- 137

Xbox-ITX nondestructive mount + Case Mod
Project by paulmdemers
A mounting system to install a mini-itx PC inside an Xbox without modifying the case. And a modded case.
- 2
- 1

Control your audio with theKnob
Project by BrainHUB Lab
TheKnob - the sound volume control knob made of concrete, with RGB LED lights.
- 776
- 32

Face-mask disinfection Device
Project by Sameera Chukkapalli
UV-C / Heat, Arduino controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2)
- 8
- 7

Octoshield
Project by GOODWIN
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
- 1.7k
- 15

IV Warming Pod- Field Ready
Project by John Loeffler
Using Cheap, Stackable, rechargable and Readily Available Components to warm IV Solutions.
- 11
- 13

the electromechanicalanalogdigitalclock
Project by Christian
A clock build with CMOS logic, moving coil meters and a stepper
- 30
- 32

|<
<
1
2
3
4
5
>
>|