48 Results for "open source ecology"

TAS Hexapod Robot Open Source Project
Project by Red Chili
Covers designing, building and programming of hexapod robot from scratch
- 0
- 0

Open assistive robotic arm for meal
Project by Julien OUDIN
An accessible robotic arm designed to help people with special feeding needs.
- 63
- 137

Open Exosuit for Differently Abled
Project by Alex M Sunny
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
- 2k
- 57

Modular Open Source Humanoid AI Robot
Project by therobotstudio
All the sections required to make a full size humanoid robot with integrated AI models - an open source response to corporate robots
- 23
- 21

Open Source Router/Laser/Lathe (Flower Router)
Project by sporkius
This project is for an Open source Router, Laser, Lathe. (Flower Router)
- 87
- 23

hRobot
Project by Hubert
open source, connected, 3D printable robotic arm, powered by ROS, with 500g lift capacity
- 66
- 41

LOTP Two-Wheeled Self-Balancing Robot
Project by Limenitis Reducta
It is an Open Source –DIY- project. It can maintain its own balance and can be controlled remotely via Bluetooth connection.
- 50
- 42

Eurobot Competition - Edog Robot 2023
Project by Gaultier Lecaillon
Open-Source Eurobot Competition Robot: ROS2 Code for Raspberry Pi 4 with Detailed Documentation in Progress
- 0
- 0

Upkie wheeled biped robots
Project by Upkie Zero
Wheeled biped robots that can balance, go around and more. Upkies are fully open source, both hardware and software.
- 37
- 40

LIN IT!
Project by Lukasz-Juranek
Aim of LIN IT! project is to prepare a system for developing cheap and LIN(Local interconnect network) complaint devices, for ROS.
- 6
- 2

MACI Cobot - 6DOF - 5Kg - 850mm
Project by Léonard Dabin
Low-cost industrial cobot
- 82
- 59

ROS-integrated Quadruped Robot: Pavlov mini
Project by Andres
Pavlov mini is a fully open-source quadruped robot that uses hobby brushless servomotors, weighs 3Kg and is about 25cm tall.
- 39
- 32

mDrawBot: 4-in-1 Drawing Robot
Project by Peter.li
mDrawBot is a 4-in-1 drawing robot kit, it can be assembled into 4 different drawing robots: mScara, mCar, mSpider and mEggBot.
- 1.5k
- 10

Plobot
Project by Rodolfo
Physical computing for toddlers
- 34
- 30

Osmar
Project by Matheus Carvalho
Open Source Microsyringe Autosampler - bit.ly/2QVnDJU
- 11
- 10

1
2
3
4
>
>|