Here is the plan. I plan to turn this into this And here is the design block diagram. There will be 3 sensor node and a nutrient control system. All of them is developed with ESP8266 board (either WeMos D1 mini or NodeMCU). I plan to use Blynk IoT...
The sun tracking system consists of: 1. Two roller shutter/awning motors: These motors are industrial, easy to purchase, cheap, and with a high torque (10Nm being the lowest). Average price of each motor around 30€...
The 5.21E ROM works file with the current board, but the 7.11A ROM uses a different pin for the vertical sync signal. This can be fixed, but then the 5.21E ROM results in no display. Rather than fixing the hardware (with a jumper to be changed when the...
This code is a slight update of the last one, updated:>Better Uptime Counter>LCD Shield>New Pin out Diagram>Restart Protected Calibration Details>EU and US Plug Calibrated Probe Also a quick update to the code so the calibration value will survive a...
Before I began the layout of the DDL4-CPU, I came up with an initial Instruction Set Architecture (ISA) for the design. It went through several revisions as I was designing the boards and refined the components. Here at the last minute as I am...
I also wanted to sniff the communication between the micro controller and radio IC, but couldn't get the case of the remote control open. At the next opportunity I brought the Mi-Light Wi-Fi controller with me and got that open more or less easily:Inside...
While whizzing through the code trying to scrounge verified keyboard scan codes and flags, I found some some buried treasure in the form of an undocumented test routine. It's not that exciting -- it just fills the current file with some sample...
So since the Teensy++ 2.0 bootloader is not available and I'm not feeling comfortable to learn all the bells and whistles of USB communications I was looking for other options. Googling "at90usb1287 arduino" I found this https://github.com/mattairtech/ArduinoCore-avr...
This represents a complete OPCODE list with 14 Constants (int values) available and 10 Labels (byte values) available for creating subroutines. Constants were favored over Labels, but this is up for evaluation. NOP and HCF were both added to the official...
I might be missing a few connections yet which I'll correct as I come across them, but here is the pinout of the XC3S250E FPGA on the control board. Note that the SRAM and the Flash share an interface bus. Also note that the JTAG interface...
I find it vexing that I have not yet figured out the RAM banking scheme. Some things:at reset, the peripheral configuration registers and internal RAM are mapped at 0000h. They can be moved elsewhere, but are not. The RAM at 40-ff is...