Close

671 Results for "%E3%80%8A%EC%98%88%EC%95%BD%EB%B2%88%ED%98%B8OIOX8489X83O6%E3%80%8B%EA%B0%95%EB%82%A83hours%E2%80%BB%E2%82%84ours3hours%EB%A0%88%EA%B9%85%EC%8A%A4%E3%81%843hours%EB%A0%88%EA%B9%85%EC%8A%A43hours%E2%99%A3%E2%97%873hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9linked 3hours%EB%A0%88%EA%B9%85%EC%8A%A4%E2%85%B73hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9%E3%82%B9%E3%81%84status"

  • JeremFuge (a.k.a. LC-LE:fuge)
  • Instructions     from JeremFuge (a.k.a. LC-LE:fuge)
  • Here below are all the connections for the JeremFuge. We describe them cable per cable with each time the beginning and the end of the cable.The breadboard is welded on the Arduino Uno.Connections Breadboard : Arduino UnoA : DigitalA2 to A7 : 2 to 7...

  • Hackaday Juice
  • Instructions     from Hackaday Juice
  • Remove the tea and let the mixture cool to 65°-85°. Pour this liquid into your 1 gallon glass jar. Make sure the jar is very clean and has no residue of any kind.

  • Address Bus
  • Instructions     from L-Star: Software-Defined 6502 Computer
  • This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...

  • Pedal Wiring
  • Instructions     from Pedalino™
  • Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...

  • Fan controller for Re:Load Pro
  • Instructions     from Fan controller for Re:Load Pro
  • Make you the PCB and get the components and any standard 60mm 4-wire fan will probably do the job. I used a JMC "6015-12HB APW" that I had lying around. The exact the same fan is readily available on eBay.I used eagle to design my PCB, and the files...

  • NODE-RED CONNECTIONS!
  • Instructions     from OBS_IRL_STREAM_DECK
  • The first thing we need is a basic flow to separate button presses into different outputs. [{"id":"50b49ab2.1e6f64","type":"mqtt in","z":"7805686.aa4fd98","name":"","topic":"button_glove","qos":"0","datatype":"auto","broker":"","x":310,"y":2180,"wires":[["ea9f502f.2dd17"]]},{"id":"ea9f502f.2dd17","type":"json","z":"7805686.aa4fd98","name":"","property":"payload","action":"obj","pretty":false,"x":490,"y":2180,"wires":[["425aef92.aa3da8"]]},{"id":"425aef92.aa3da8","type":"function","z":"7805686.aa4fd98","name":"ButtonSeperator","func":"var...

  • Circuit Connection:
  • Instructions     from DIY Arduino Tic Toc Toe Game
  • Connect the push buttons keypad to Arduino Uno as shown in circuit diagram.(R1~A0,R2~A1,R3~A2,R4~A3,C1~A4,C2~A5,C3~Pin 2,C4~Pin 3).Also take a extra push button(Reset Button) and connect to Arduino.(Reset,GND).Connect all the pixel LEDs.(-Ve/GND~GND,+Ve/5V~5V,Data...

  • Step 3
  • Instructions     from ESP32-Driven Bluetooth Image & GIF Display
  • Add ESP32 board Open the Arduino IDE.Go to File> Preferences.In the “Additional Boards Manager” URLs field, add the following URL: ‘https://dl.espressif.com/dl/package_esp32_index.json’.Click OK.

  • Geiger–Müller Tubes

  • Instructions     from Cosmic Array
  • I've had comments regarding the validity of using Geiger–Müller Tubes for a cosmic ray (muon) detector. Pointing out that Photomultipliers and scintillation panels are best, and yes the are far more effective. However, they are also expensive,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday