Results for %EC%B2%9C%EC%95%88%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%EF%BC%9Cwww%2Coptime4.com%EC%B2%9C%EC%95%88%EC%98%A4%ED%94%BC %EC%B2%9C%EC%95%88%EB%A7%88%EC%82%AC%EC%A7%80 %EF%BC%9E %EC%B2%9C%EC%95%88%EC%98%A4%ED%94%BC%E1%99%89 %EC%B2%9C%EC%95%88%EC%98%A4%ED%94%BC%EC%82%AC%EC%9D%B4%ED%8A%B8%E1%99%89 %EC%B2%9C%EC%95%88%ED%9C%B4%EA%B2%8C%ED%85%94 %EC%B2%9C%EC%95%88%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84

Rails
Instructions from Rave in a briefcase
I went for 2x3U. I screwed a piece of roofing battens into the case and the bottom rail directly onto them. The middle rails are just screwed together and are laid onto some standoff I laser cutted out of some scrap wood. The top rail...

Clone of stEve
Instructions from Clone of stEve
Mechanical assembly- Stepper motors into parts A1 & A2- Ends B1 & B2 slot into A1 & A2 to make a rectangle (B2 has no tabs, it goes in at the hook ends of A1 & A2)

Clone of stEve
Instructions from Clone of stEve
- A1,A2,B1,B2 assembly snaps into base C (line it up and pull the two spring clips back if necessary)- Tape a nut into slots on B1 & B2 (tape on one side should be enough to stop the nut falling out)

AVR-ZIF Programmer
Instructions from AVR-ZIF Programmer
Put your Mega8 (or 88/168/328) in the ZIF socket in the right position for Mega8. Put the RESET-Jumper P5 in the Position PROG.

Raspberry Pi Zero Smart Glass
Instructions from Raspberry Pi Zero Smart Glass
Bonus: DIY Battery Pack with Indicator Here is the schematic to make a DIY battery pack with indicator for pi Glasses.

Ai Weather Presenter #StephenHawking
Instructions from Ai Weather Presenter #StephenHawking
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Manual SMT Pick and Place Machine
Instructions from Manual SMT Pick and Place Machine
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Electro-Magnetic Enabled Bagpipes
Instructions from Electro-Magnetic Enabled Bagpipes
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Arduino GPRS IOT Weather Station
Instructions from Arduino GPRS IOT Weather Station
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

littleBits Halloween Hack-o-Lantern
Instructions from littleBits Halloween Hack-o-Lantern
Next, you need to trace your design onto your pumpkin. We used a Dracula-ed version of our icon aka BitGuy. Download the PDF below, or use one of your own designs! Carve your pumpkin and remove all the guts. PRO TIP: spray the inside of your pumpkin...

Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Instructions from Cheap-dirty-perfect V-Groove Foam Cutter / Bender
To bend the foam...Add some adhesive tape on the backside of the foam and you can safely bend it.I learnt this trick from Ed at Experimental Airlines and used the tool to build his Photon glider.

NODE-RED CONNECTIONS!
Instructions from OBS_IRL_STREAM_DECK
The first thing we need is a basic flow to separate button presses into different outputs. [{"id":"50b49ab2.1e6f64","type":"mqtt in","z":"7805686.aa4fd98","name":"","topic":"button_glove","qos":"0","datatype":"auto","broker":"","x":310,"y":2180,"wires":[["ea9f502f.2dd17"]]},{"id":"ea9f502f.2dd17","type":"json","z":"7805686.aa4fd98","name":"","property":"payload","action":"obj","pretty":false,"x":490,"y":2180,"wires":[["425aef92.aa3da8"]]},{"id":"425aef92.aa3da8","type":"function","z":"7805686.aa4fd98","name":"ButtonSeperator","func":"var...