27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남몰디브ㄿ 《〈 문의 OIO↗5793↗7458 》〉 ㄻaudienceピ몰디브가라오케신사동몰디브шshop 신사동몰디브강남몰디브가라오케 강남몰디브ら신사동몰디브♩safely⒞"

Open Indirect Ophthalmoscope
Instructions from Open Indirect Ophthalmoscope
The step by step build instructions for "OIO" can be found here: http://www.instructables.com/id/Open-Indirect-Ophthalmoscope-OIO/

Ready
Instructions from PewPew LCD
Safely remove the USB disk, and disconnect the device. Insert a battery.

Repurposed steam cleaner
Instructions from Repurposed steam cleaner
I removed the on/off switch from the circuit. keep if it can be mounted safely.

Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Instructions from Cheap-dirty-perfect V-Groove Foam Cutter / Bender
To bend the foam...Add some adhesive tape on the backside of the foam and you can safely bend it.I learnt this trick from Ed at Experimental Airlines and used the tool to build his Photon glider.

Raspberry Tor Router
Instructions from Raspberry Tor Router
Log back in and safely shut down your Pi. Insert your WiFi dongle and power everything back on. You should now see an extra WiFi source in your home!At the moment, it is just a normal WiFi source, just like your wireless router.The SSID is whatever you...

NixieBot
Instructions from NixieBot
This project involves high voltages that will definitely hurt like hell and probably kill you if you touch the wrong bits when powered up (170V @ up to 45ma DC). Do not attempt to build this unless you are comfortable with HV safety practices and know...

Open the gate, wicket or door with your Smartphone
Instructions from Open the gate, wicket or door with your Smartphone
Now we need to prepare the SD card (I have been working on a Windows 7 based PC). Download and unzip SD card image https://www.supla.org/download/rbpiext01.zipInsert the SD card into your computer’s card reader.Using Administrator account run the DiskImager...

Nintendo TV
Instructions from Nintendo TV
WARNING! CRTs can hold dangerous and potentially lethal electrical charges even after being unplugged for years. Always safely discharge TVs with the appropriate tools before touching them.After getting the TV/DVD combo I was thinking I could just rip...

Raspberry Pi Car Audio Player
Instructions from Raspberry Pi Car Audio Player
Turning on and offThe last hurdle I needed to overcome was powering up and turning off the Raspberry Pi car audio player safely, without corrupting the SD card. I am well aware of the fantastic, but expensive to buy if you live outside the US, Mausberry...

Solid-state garduino with RTC & LCD!
Instructions from Solid-state garduino with RTC & LCD!
If you can't safely wire 120VAC, please stop here. I bear no responsibility for any bodily injury, death, or loss of property as a result of mimicking this project.Wired 120VAC through the Solid State Relays, outlets, and switches shown in the schematic.Within...

Ikea Lack Infinity Table
Instructions from Ikea Lack Infinity Table
Order your glass and maybe mirror and arrange a way to get it home safely.I bought the table and cut first, creating a period of time where I had a substantial hole in my daily use table.The glass had to be custom cut for the Ikea table's dimensions....

Small Solar-Grid Workstation Experiment
Instructions from Small Solar-Grid Workstation Experiment
The battery is located under my office desk (opposite side of the room, the cables run along the wall). This is a special battery - sealed AGM which is safe for in-door use. It has a built-in inverter with 3 AC outlets on the front. Also on the front...

Smart Grid Test Facility
Instructions from Smart Grid Test Facility
User's Guide1. Plug the orange cord into a wall outlet (120V, 60Hz) to power the cart and its systems2. Turn on the reference generator to power the grid network3. Turn on one mechanical generator and synchronize it to the grid4. Turn on the other mechanical...

110 / 230 V~ PCB Heated Bed
Instructions from 110 / 230 V~ PCB Heated Bed
FoldbackIt should be obvious, but here I say it: Never, ever print directly on the mains voltage bed. I don't recommend just clamping a printing surface on it, the heated bed must be safely enclosed on the bottom side to prevent users from touching the...

Pi Zero in a NES Controller
Instructions from Pi Zero in a NES Controller
Step 3: Assemble and testTaking the PCB check the traces match up to the colours below and then solder directly to the Pi. Add a blob of hot glue to act as strain relief on the wires once you have checked it all works.NES PinWire ColourSignalGPIO1WhiteGroundAny...

1
2
3
4
5
>
>|