Close

21 Results for "《예약번호OIOX8489X83O6》3hours후기⑤┾healthy㎎3hours후기강남3hoursしpossessed 3hours레깅스3hours 3hours레깅스가격ㅭ3hoursЫglass┮"

  • Hackaday Juice
  • Instructions     from Hackaday Juice
  • If you want more kombucha, start the process over again! A healthy SCOBY is always happy to create more kombucha. This time all you will need is to brew, sweeten, and cool the tea. Add it in and let it sit. Hooray!

  • Salvaging 18650s For Projects
  • Instructions     from Salvaging 18650s For Projects
  • Now we should end up with a group of cell that have a voltage between 3 and 4.2 volts but this doesnt mean its completly healthy as the cells may loose charge over time at a fast rate, to make sure this isnt happening charge the cells up to 4.2 volts,...

  • Salvaging 18650s For Projects
  • Instructions     from Salvaging 18650s For Projects
  • So now we've got the cells out of their casing and seperated them, this is where we are going to need a multimeter, over time some cells degrade, leak or rustwhich will result in a dead cell. Finding cells that have leaked or rusted are pretty easy just...

  • Circuit Design
  • Instructions     from Temperature Measuring Automatic & Voice Inform
  • Basically, it will measure temperature from infrared thermometer GY-906, then show result on Oled LCD 128*64. It also inform you the result temperature by voice via speaker. The speaker will take audio file from SD card, then play based on temperature...

  • Step 6: The Code Works
  • Instructions     from Automatic Alcohol Dispenser With Arduino
  • The code works is not so difficult for me, take about 1 hour to finish. The code can be downloaded here https://bit.ly/2XuECIy Function of the code as following: 1. Detect hand (obstacle) near ultrasonic sensor 2. It will push out alcohol (delay...

  • Tecedi SmartZap: Adblock for TV
  • Instructions     from Tecedi SmartZap: Adblock for TV
  • Floppy up!As a temporary solution and to make good use of 3"5 floppies laying around, I carved floppy disks with a Dremel and used a glue pistol to assemble all of it into a case for my raspberry pi and my HDMI switch.Cutting the floppies was not very...

  • Hackaday Juice
  • Instructions     from Hackaday Juice
  • Now it sits. Leave it alone, undisturbed and out of direct sunlight. Make sure it is sitting in a place that is between 68° and 85.° After 7-30 days it will be ready. The amount of time required depends on the type of taste you prefer. Younger...

  • Tear Down
  • Instructions     from Ultraviolet Microwave (name subject to change)
  • Microwave can generate lethal voltages, and as a reminder, please make sure it isn’t plugged in when you start working on it. Remove the U shaped metal shroud over the top and sides of the microwave. These are held in by a few metal screws and one of...

  • Run the Web Application
  • Instructions     from RoHA (Respiratory Health Analyzer)
  • Once all the settings are done and web application is uploaded, you can connect the sensor node and then open the web app in the browser using following URL. http://localhost/RoHA_WebApp/ or http://192.168.157.130/RoHA_WebApp/ Remember that 192.168.157.130 is...

  • Introduction
  • Instructions     from Pet Pot
  • Introducing Pet Pot - Not Your Ordinary Planter! Have you ever wanted a plant that communicates with you? Well, that's exactly what Pet Pot is all about! Pet Pot is not just an ordinary planter; it's a smart planter with a unique personality. Pet Pot...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday