552 Results for "3D printing"

3D Printing & Installing Switch Panel
Instructions from Customizable 5 Buttons WiFi Smart Home Switch
The step is quite straight forward. I designed a flexible PLA pieces that can be screw on top of the PCB to act as a front cover while provide enough flexibility so you can press the pieces and activate the SMD button below. There are also tiny holes...

CAD Design and 3D Printing
Instructions from MicroMote: The ESP-Now Based Gesture Remote
I designed MicroMote in Autodesk Fusion 360, I used datasheets and scale to measure the dimensions of different components and designed the model. I have attached both stl files and the original Fusion 360 model. You can directly...

Print Or Order The 3D Parts
Instructions from Diy Small But Powerful ESP32 NAS
For this project, you'll need 12 essential 3D printed parts. If you don't have a 3D printer, don't worry! Simply order them from JLCPCB's site site, with prices starting at just $1. For the best visual appeal, I recommend opting for the 'Imagine Black'...

Printing
Instructions from Repairing a tool wall organiser
Print 2 halves of the same model at a 3D printer with ABS filament. High infill recommended (over 50%)

STEP 2: SMOOTH OUT SOME IMPERFECTIONS THAT RESULTED FROM THE 3D PRINTING PROCESS
Instructions from 3D PRINTED PORTABLE WIND TURBINE
It is recommended to sand the pieces in the places where the supports were created. Also to smooth out any bumps that could affect performance or cause damage to hands when handling. Be careful with the sharp edges of the plastic, they can cut your skin....

3D Printer modification
Instructions from Pimp my 3D Printer
Since all 3D printers are different, we will show an overview of each step rather than provide detailed documentation. It basically involves removing two parts from the 3D printer: the extruder and the hot end. Step 1: Remove the 3D printer parts We...

Stage 1. 3D maps with pop – up continents for visually impaired.
Instructions from Interactive maps for visually impaired
We made contour map on the graph paper using single map and made our contour point by point, counting the coordinates of contours. Thus we have some point arrays. We paste the arrays in 3d- CAD program. We add the curves of the equator, tropics, polar...

Printing the parts with a 3D printer
Instructions from Blockchain Camera
TOOLS 3D Printer COMPONENTS 3D Printer ABS Filament FILES RPi_Case_Top_v11.stlRPi_Case_Side_v12.stlRPi_Case_Base_v13.stlPower_Bank_Holder_Top_v11.stlPower_Bank_Holder_Side_v11.stl Power_Bank_Holder_Base_v13.stlShutter_Button_Plate_v11.stlShutter_Button_Side_v11.stlShutter_Button_Base_V11.stlUSB_Connector_Top_v11.stlUSB_Connector_Bottom_v11.stl...

Assembling Part 1 - 3D printing parts and servos
Instructions from Wombatics Otto
Put two servos into the body and secure them with the screws come with the servos Join the leg to the body with the servo horn Put the two servos into the leg, and put the hood onto the leg servos while keeping the servos at 90 degree. Put the servo...

The top 3D-printed Raspberry Pi cases
Instructions from The top 3D Printed Raspberry Pi cases
If you are looking for the best 3D-printed Raspberry Pi cases, then you have come to the right place. In this article, we will be discussing the top 10 3D-printed Raspberry Pi cases that are available in the market. We all know that the Raspberry...

Step 2: Printing the Parts
Instructions from OpenBraille Steam
All the parts can be 3D printed. Follow the link and get the files: https://www.thingiverse.com/thing:258673

Step 2.1: Assembling the 3D-printed case
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After printing all parts (models), I fastened the external battery (Xiaomi 10000 mAh power bank) into the main case via a hot glue gun. Then, I attached the PCB holder to the removable top cover via M3 screws and nuts. After mounting the PCB holder,...

Easy Build my own useful Robot For Less Than $100
Instructions from Easy Build my own useful Robot For Less Than $100
3.2. MoldUse 3D printer to print mold.3.2.1. Download SelfieBot mold STL files at: https://pinshape.com/items/22311-3d-printed-selfi... or https://pinshape.com/items/22311-3d-printed-selfi...3.2.2. Use Cura (download Cura) to convert SelfieBot mold STL...

My first copter build with RPi2 and Emlid Navio2
Instructions from My first copter build with RPi2 and Emlid Navio2
3d printing of the case and anti-vibration mount. I should say that Emlid has an anti-vibration mount model only for 450mm frame. In my case I had to redesign it for 250mm. 3d model for case I've taken from here. Within the project I've attached files...

Send the PCB to Print
Instructions from DIY $8 Mechanical Numpad
The PCB is the main component of the build. So the first thing you want to do is send the PCB to print. Some manufacturer provide free printing services of 1 board per month. If you have a chance to get such promotion discount, you can get a PCB for...

|<
<
1
2
3
4
5
>
>|