1495 Results for "3D printing"

3D Printing
Instructions from Pixo | Dazzling Desk Display
Now, I've got the Pixo enclosure and back cover 3D-printed, both of which I designed. I utilized the Anycubic Neo 3D printer with a 2mm layer height. Take note: in my design, the enclosure and diffuser are part of the same body, allowing for a seamless...

3D Printing
Instructions from Positivitypunk Backpack
To print bolt holes, offset from the plane of the printer, I created 4 cylinders and aligned them a layer or two below where the hole would start to print. Each cylinder is a solid model, two layers thick. Once sliced, support will not need to be generated,...

3D Printing
Instructions from DIY Solar Bottle Lamp
I have used my Creality CR-10 Mini printer and 1.75 mm PTEG filaments to print the parts. I have printed it in 3 different colors yellow, Orange and Cyan. The diffuser is printed in the transparent filament. You need a support structure for printing...

3D Printing
Instructions from CRT-Style Pi Portable — Pi Terminal
Grab the STLs from Thingiverse or directly from this page. Just a heads up, this is a very long print compared to a quick weekend project, it's about 4 days of straight printing. In the video you can see how long each part took to complete. I spread...

3D printing 2.0
Instructions from Battle boat Game
To open an STL 3D file, you must have a 'slicer', for example Ultimaker Cura is an effective one. In the slicer, you will have to select your printer, and also select the printing options to optimise your prints. In the 'file' section you can find the...

3D printing settings
Instructions from APEROLiker / HUGOliker - Cocktail Mixer
3D printing settings Prints without support Use PLA for the best results MATERIAL: PLA / ABS LAYER HEIGHT: Recommended: 0.2mm EXTRUSION WIDTH: Recommended: Forced 0.4mm INFILL TYPE: Gyroid INFILL PERCENTAGE: Recommended: 40>#/p### WALL COUNT: Recommended:...

3D printing
Instructions from Eyetooth Gaming Keypad
STL files are available on github or thingiverse. The CAD design is available on Onshape. The parts should be printed without supports. The side key openings have support designed in which can easily be removed after printing. ...

3D Printing
Instructions from 3D Printed Lithophane Lamp
I have printed the parts using Creality Ender 3 with White PLA filament and 0.4mm nozzle diameter. The main body took approximately 14hrs to complete. So make sure your slicer settings are just right. Slicer settings for printing the main body and cover...

3D Printing
Instructions from PUC: Personal Utility Cyberdeck
The files are here and on Thingiverse(https://www.thingiverse.com/thing:5877289), you might need to make some adjustments, if you use other parts than I did, because some of them i had laying around or bought at a local dollar store(mainly the powerbank)...

3D print components
Instructions from Crystal RGB
3D print the crystal base from Thingiverse. After this is done, start printing the crystal itself and while it's doing that we will assemble the electronics in the base.

3D printing
Instructions from Solder Paste dispenser
You can find the 3D models for the project on Thingiverse. All the models can be printed without supports except button ring model. I recommend print these parts with 0.1 mm layer height and 100% infill.Screw and the long nut were designed...

3D printing
Instructions from Prismatic Scara
To manufacture the parts, a 3D printer is used, specifically the CR-10 printer, using the Cura 4.11 software with the following parameters: Layer Height: 0.2mmNozzle: 0.4mmTree supports with 60° overangleHorizontal expansion: -0.05mmMaterial: PLAWeight...

3D printing
Instructions from E-TKT: anachronic label maker
16 parts in total, using approximately 220g of filament (I’ve used PETG). Click above to see an interactive 3D model. 📐 All the .stl provided are in the correct orientation for optimal printing: A_bottom *B_wall *C_wall_track *D_pillarE_pillarF_pillarG_pillarH_nema_cover...

3D Printing the case
Instructions from Triink - low power BLE E-Paper Clock
Print both the Cap and Case without support and 0.2mm height The Cap should snap into the Case without much force. The needed files are in the uploaded .zip fileThe Battery, PCB and E-Paper display can be slit into the side of the Case

3D Printing
Instructions from PantoProbe
I've printed these models in both PLA and ABS. In the videos all the things are printed using my Prusa i3 Mk2 with PLA. I just use 0.2 layer height, and the default infill percentage. No supports or brims required. I'm...

|<
<
1
2
3
4
5
>
>|