1495 Results for "3D printing"

ASSEMBLY PROCESS
Instructions from PORTABLE Space Trash Game Console
In order to complete the build, we connected the JST connector of the LiPo cell into the expansion board first, and then we placed the LiPo cell into the 3D printed base.Next, we position the switch PCB and expansion board on the expansion board in their...

Game Show Emulator
Instructions from Game Show Emulator
Build an EnclosureThe enclosure is up to you. Here are some ideas:Three plywood cases with removable bottoms. Three 3D printed cases with snap together bottomsThree laser cut cases (plastic or wood)

UV-badge
Instructions from UV-badge
Programming adapterSolder the programming adapter components to the programming adapter PCB. Insert the adapter PCB into the 3D printed clip.

LiPo Charger + Boost
Instructions from LiPo Charger + Boost
All that is required for this building portion is soldering the components to the PCBs. Further down, I intend on making a 3D case.

3D Printed Skittles Sorting Machine
Instructions from 3D Printed Skittles Sorting Machine
I don't really have time to create step by step instructions right now, but hopefully you can figure out most of it by looking at the 3d model, source code, and blog entries. I'm also available to answer questions if anyone wants to attempt the build....

MobBob - Smart-phone powered robotic companion
Instructions from MobBob - Smart-phone powered robotic companion
Print the 3D printed parts.The parts should be pretty straight forward to print. The phone holder is probably the trickiest part. You will probably need to use supports to print that part.

LED Polyhedron
Instructions from LED Polyhedron
Let's go 3D!Use the faces you have made, and add more edge segments to build up the 3-dimensional body of the polyhedron.

LED Polyhedron
Instructions from LED Polyhedron
Done!Add power to your creation and enjoy!Be careful not to mix up the + and - power wires.You may build or 3D print a base.

Wooden sensor box w/ 2 rotary disks
Instructions from Wooden sensor box w/ 2 rotary disks
I was designing this box with SketchUp. I knew the dimensions, and what sensors I'd like to use, but hardly more. Here is how i ended up with the 3D model:

Hugo (or 'U go!)
Instructions from Hugo (or 'U go!)
A (hopefully) good instruction set of the features and assembly steps of the Hugo device including the 3D printable files can be found on Instructables.com at the following link: http://www.instructables.com/id/Hugo-or-U-Go-for-LinkIt-ONE/

VR Tracker
Instructions from VR Tracker
Behind the curtains : calculating 3D position by image resectionningThe system uses OpenCV to calculate the 3D position form multiples 2D positions.First a calibration sequence is required. The calibration consists of recording some 2D positions with...

MagicShifter 3000
Instructions from MagicShifter 3000
The MagicShifter3000 comes fully assembled, but there is also a DIY edition available if you want to print your own case.You can download the .stl files for the 3D-printable case and the lasercuttable inlay here

Cathedral Raspberry Pi Internet Radio
Instructions from Cathedral Raspberry Pi Internet Radio
Print Buttons (Optional)I have access to a 3D Printer, so I printed the button/knobs (also included in the files). This step is really optional because there are tons of knobs out there, find what you like and run with it.

Home Build - Spiffchorder Refactorization
Instructions from Home Build - Spiffchorder Refactorization
Next you will want to 3d print the pieces. This is an excellent time to program the Adafruit Feather board for later. I don't know if it matters but I strongly advise not programming the feather while it is running on the LiPo battery.

3D Printed Chamfer Tool
Instructions from 3D Printed Chamfer Tool
3d print the two STL files attached to this project. I printed the plane and wedge on their sides and both came out nicely. Of course I use a nice printer with soluble support material, your results may vary. I may revise the design in the future to...

|<
<
47
48
49
50
51
>
>|