Close

1495 Results for "3D%20printing"

  • 3D Printing
  • Instructions     from DIY Solar Bottle Lamp
  • I have used my Creality CR-10 Mini printer and 1.75 mm PTEG filaments to print the parts. I have printed it in 3 different colors yellow, Orange and Cyan. The diffuser is printed in the transparent filament. You need a support structure for printing...

  • 3D Printing
  • Instructions     from CRT-Style Pi Portable — Pi Terminal
  • Grab the STLs from Thingiverse or directly from this page. Just a heads up, this is a very long print compared to a quick weekend project, it's about 4 days of straight printing. In the video you can see how long each part took to complete. I spread...

  • 3D Modeling
  • Instructions     from IoT Cat Litter Box (with ESP32 and Thingspeak)
  • 3D printing was used to make some of the parts in this project. Of course the litter box itself was bought in a normal pet shop. However, some custom parts had to be designed and printed to allow the electronics to be added to the litter box. All parts...

  • 3D Printing
  • Instructions     from Fear the Scary Cat!
  • I have included the STL files that I used to 3D print the cat's head, body (with labeled base plate), and the base housing for the electronics. The cat's body took a long time to print...around 18-24 hours at the layer height and speed that I selected....

  • 3D Printing
  • Instructions     from Put n Play Cube
  • The case is composed of two halves. Depending on your printer settings it will take you about 6-7 hours to print all three parts. The case has been designed in a way that almost no support structures are required. We recommend to print only support for...

  • 3D printing
  • Instructions     from Eyetooth Gaming Keypad
  • STL files are available on github or  thingiverse. The CAD design is available on Onshape. The parts should be printed without supports.  The side key openings have support designed in which can easily be removed after printing. ...

  • 3D Printing
  • Instructions     from 3D Printed Lithophane Lamp
  • I have printed the parts using Creality Ender 3 with White PLA filament and 0.4mm nozzle diameter. The main body took approximately 14hrs to complete. So make sure your slicer settings are just right. Slicer settings for printing the main body and cover...

  • 3D Printing
  • Instructions     from PUC: Personal Utility Cyberdeck
  • The files are here and on Thingiverse(https://www.thingiverse.com/thing:5877289), you might need to make some adjustments, if you use other parts than I did, because some of them i had laying around or bought at a local dollar store(mainly the powerbank)...

  • 3D printing
  • Instructions     from Flying saucer clock (and NAS!)
  • I created a spreadsheet of the times to print the parts for the basic flying saucer. This is the one I made without a NAS in it, that acts as a slave set of 84 LEDs to the first. It takes around 8 days to print (at 14 hours per day) or less when...

  • 3D Modeling
  • Instructions     from Positivitypunk Backpack
  • My build started in Fusion 360. First modeling everything that needed to fit within the back and arranged them somewhat to fit tightly. I left room for a raspberry pi, which I did not model because I measured the space between the components and found...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday