5826 Results for "X 올림피크 리옹 CDDC7닷컴 ㅿ프로모션번호 B77ㅿbepickڸ원엑스벳 슬롯머신ಣ서천복권방ṓ한화이글스오늘경기ୀ올림피크 리옹사랑 backpedal/"

Myriad X Modules Shipped!
Log from Luxonis DepthAI
Hi again! So our first Myriad X modules _finally_ shipped! So we're expecting to have these in-hand tomorrow, Tuesday August 20th. So back-story on these is that we ordered them on June 26th w/ 3-week turn from MacroFab (who we really like, and...

X Axis part 2
Log from 3D Printer
Now that the upper guide is mounted, the lower guide and upper bearings can be added. The lower guide is mounted with a couple of aluminum pcs. These mounts were bored out for a snug with with the lower guide:The mounts were then relieved to allow for...

Eight X Beef
Log from BeefyDuino
In the latest news on the BeefyDuino frontier, my friend Ryan who is the founder of elequa, the company I am helping to start, assembled eight BeefyDuino prototypes (with a little help from his friends including me). He did this because he was going...

Building the X-axis
Log from Turning a Makibox into a PCB Mill
Re-designing the X-axis of my Makibox to PCB mill conversion has been a challenge in constraints. Due to an ordering mishap, and lack of engineering designs for the spindle I have been racking my brain to re-use the parts I have to create a workable...

PewPew X Assembled
Log from PewPew Standalone
Thanks to the generosity of @oshpark, the PCBs for version 10.2 arrived today. I spent the evening assembling it and updating the code to handle the new button arrangement. Here it is, with the working scrolling text in all its glory:Please excuse the...

Double crossover x Arduino
Log from Urban Sci Fi Trainset
There are nifty little DCC decoder chips that are so small they can be installed fully within turnouts and make them addressable from the computer, drawing power from the track. But they're expensive and you need 1 per solenoid otherwise they would draw...

X axis troubleshooting
Log from Fixing the OS12 scope
The tube driving the horizontal deflection is V5. The X shift is drien by a variable internal resistor, in series with a 440K resistor. In that configuration, The beam never went far from the center-right of the screen with the variable resistor set...

Impeller drive x 2
Log from Arcus-3D-M1 - Full Color Filament Printer
Finished a new impeller motor.Added optical feedback. Used an old mechanical mouse wheel with every other tooth removed, and machined a new shaft coupler.I must have damaged the bushings along the way. It no longer spins freely. I wasn't liking how heavy...

DB-x breakout
Log from Breadboard Widgets
As per @Howard Jones' suggestion I've made a breakout board for the following D-sub connectors:DA-15DB-9 (or more accurately DE-9)DE-15 (VGA)I'll spare you the (obvious) schematics (

V3.x Calibration Procedure
Log from TritiLED
I added some code in GitHub for calibrating the V3.x boards. Since the inductor has a +/-30% tolerance, the brightness and runtime can vary significantly from board to board. These differences are easily calibrated out by running a little...

Solve for Gen X
Log from Tardygrade
I did study some math while at university. But like many (most) of my compatriots I didn't learn math so much as I learned how to take exams. I've since lived under constant threat of that laziness coming back to bite me. Even one of the issues...

[X] No immediate leaks!
Log from Coaxial8or [gd0144]
[X] = Experiment / TestI wake up. It's 9am. I think "If I test the hotend now, I might be able to make it to the uni if things go wrong." It took 6 hours, with the first 3 hours just finding my seldom used soldering gear because the...

X and Y axis test
Log from Big Scale Table Plotter

The X Files
Log from Obsidian
Thank the stars for (near) perfect recall. I dont have the ability to snapshot pages of information just by looking at them. But, information does persist for a very long time nonetheless. It's handy sometimes. ;-) Destination: Hackington I was at college...

Z Section, testing X
Log from OX CNC
I forgot to detail the photos as much on the Zit's a pain to put together, i used a nylon block to hold up the bolts protruding on the lower side of the gantry, then it popped into the hole.added the z column, it was tought to move up and down but i'd...

|<
<
3
4
5
6
7
>
>|