1314 Results for "X 올림피크 리옹 CDDC7닷컴 ㅿ프로모션번호 B77ㅿbepickڸ원엑스벳 슬롯머신ಣ서천복권방ṓ한화이글스오늘경기ୀ올림피크 리옹사랑 backpedal/"

Prepare cam arms
Instructions from KSP Controller Hardware
Parts required: 2 x printed part mk2_camarmpair_6v_hyb.stl (each print is for a matched pair of cam arms)4 x M3 x 12mm socket head screws4 x M3 washers4 x M3 nuts2 x spings (these are random ones that I got from the local hardware store. I'll measure...

Luggable PC
Instructions from Luggable PC
Install handle on top extrusion1 x Misumi HHDFL19 handle2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nut

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
Frame Parts:20 x 20 x 3 mm steel box section x 12mThe frame allows all the components to be mounted securely which is important for reliability and safety. Remember we have potentially explosive vapours and 240 volt electricity.

The Dragino IoT Kit
Instructions from LoRaWAN using Dragino Gateway and TheThingsNetwork
The Dragino IoT Kit is a well-designed kit to facilitate beginners and developers to quickly learn LoRa and IoT Technology. With the help of this kit, you can make a lot of LoRa based project and also learn about the IoT applications of LoRa. This kit...

Control a Humidifier with a Raspberry Pi
Instructions from Control a Humidifier with a Raspberry Pi
Make index.py executablecd ~/raspi-rht/web/ chmod +x index.py

Control a Humidifier with a Raspberry Pi
Instructions from Control a Humidifier with a Raspberry Pi
Make executable and add to startupsudo chmod +x /etc/init.d/raspiRHTindex sudo update-rc.d raspiRHTindex defaults 80

Dtto - Explorer Modular Robot
Instructions from Dtto - Explorer Modular Robot
We need:- 1 x Part 006-1- 1 x Part 008-1- 1 x Part 010-1- 12 x Neodymium MagnetsAs we did in the previous step, we will put the magnets in the female parts. Now, remember to put all magnets with the north pole facing the outside of the module. If we...

Ventilator Housing for three ventilators
Instructions from Ventilator Housing for three ventilators
Cut the base plates (390mm x 130mm) (twice for front and back) using a circular saw or anything else which gives you good results

Luggable PC
Instructions from Luggable PC
Install SATA data cables2 x SATA cable

Luggable PC
Instructions from Luggable PC
Install Power Supply Unit1 x Full sized ATX PSU

Luggable PC
Instructions from Luggable PC
Install top extrusion1 x 285mm Misumi HFS5 extrusion

Make the EEPROM flasher executable and Flash the EEPROM with the eeprom file:
Instructions from Make Your Own Google Voice HAT
sudo chmod +x ./eepflash.sh sudo ./eepflash.sh -w -f=voicehat.eep -t=24c32

Simple PC Joystick with DigiSpark
Instructions from Control Freak
Procedure: Assemble the circuit using the schematics provided and upload the firmwmare to the board. Materials: 1 x Digispark1 x DB-15 female connector2 x 120 Ohms resistor2 x 4,7nF capacitor Firmware: https://raw.githubusercontent.com/Danjovic/ControlFreak/master/digi-PC_Joy/digi-PC_Joy.ino...

Atari 2600 controllers
Instructions from Control Freak
Procedure: Assemble the circuit using the schematics provided and upload the firmware to the board. Materials:1 x Arduino Pro Micro1 x DB-9 male connector2 x 120 Ohms resistor2 x 1nF capacitor Firmware: https://raw.githubusercontent.com/Danjovic/ControlFreak/master/Atari2600/Atari2600.ino...

The X-PC
Instructions from The X-PC
Screw in the M3 x 15mm Hex Spacers.

|<
<
5
6
7
8
9
>
>|