115 Results for "feather"

Installing libraries and breadboarding
Instructions from ESP8266 Arduino Tutorial, Part 3
In order for this project to build and upload successfully, we need to add a few more libraries to our Arduino environment. Fire up Arduino, and then just like way back in part 1, open the Library Manager by pressing Ctrl-Shift-I. In the search box,...

$50 Foot Controlled Mouse
Instructions from $50 Foot Controlled Mouse
The schematic for the control board is pretty simple. In this build, I used basic radio shack perfboard, which does not have vias or support soldering. This meant wrapping component tails through the board and soldering directly to them.The schematic...

M.A.B
Instructions from M.A.B
FIRST TEST ESP - BLYNK 1) see first instruction to install Blynk2) install ESP8266 huzzah feather board onto the arduino IDE using the following link : http://arduino.esp8266.com/stable/package_esp8266com_index.json3) Go to File > Examples > Blynk >...

Build the Base Unit
Instructions from The Compost Professor - A Smart Composting System
Component Needed: Huzzah Feather RFM69HCW WingM2.5 ScrewsBase Case and Cover 3D filesGlue3MM Red/Yellow-Green RGB LEDTactile button (6mm height)USB wall charger and USB cable Steps: Upload the base_unit.ino file to the Huzzah selected for the Base Unit...

Ubidots account setup
Instructions from Connect your Feather HUZZAH ESP8266 to Ubidots
With the following example, you will be able to simulate random readings taken from the Feather HUZZAH ESP8266 to Ubidots 1. To begin posting values to Ubidots, open the Arduino IDE and paste the sample code below. Once you have pasted the code, be sure...

Set the RTC
Instructions from Feeding Experimentation Device (FED) 2.0
The Adalogger M0 has a RTC built in, which allows it to keep accurate time. First we must set the clock though. Download the code FED2-SetClock.ino from the files area and flash this code to the FED. If you don't know how to flash...

Download FED3 sketch and flash FED3
Instructions from Feeding Experimentation Device 3 (FED3)
Before assembling the device into the 3D housing, you should confirm that it works. Extract the latest FED3 Arduino Sketch (in the files area) and the sketch "FED3_SetClock_063019.ino" to where ever you like to keep Arduino sketches (for me it's:...

Checking to start
Instructions from Pulse sensor to actuate a Robotic Hand
First check the you have necessary materials to make the project. You need some 3D printed parts, so a printer is necessary or at least the posibility of print. We print with protopasta carbon fiber filament but you can print in PLA, thats if you want...

Set the time on the Real-Time-Clock (RTC)
Instructions from Automated mouse homecage two-bottle choice test v2
There are two ways to set the clock. You can flash the Feather M0 with SipCounter-SetClock.ino (in the files area). This will set the sipper clock to the same as your computer clock.When successful it will show the new date and time on the screen. ...

Microcontroller assembly
Instructions from HEGduino
This part is fairly self explanatory as everything is clearly labeled. First add the 2.7kOhm resistor and the ADS1115. The ADS1115 has clearly marked VDD and A0 pins to indicate the direction it should be placed on the hub board. Clip the leads to make...

SAMD21 + QUECTEL L80 GPS
Instructions from Atomic Synchronator => TicTacSync
For now, I'm building TicTacSyncs with off the shelf boards, here an Adafruit Ultimate GPS FeatherWing (25 USD) and a Adafruit Feather M0 Basic Proto (20 USD): Flash the board using the Arduino IDE with this program: ppssyncYears.ino A motivated maker...

LRAM (Linear Rotational Axle Mechanism)
Instructions from T-100
We thought about a rack and pinion system. Electromagnet system, only they're really expensive. So we settled for something more simple. One part is a linear belt system where a slider is dragged linearly over an axis. there's a bearing clamped into...

Introduction
Instructions from What is MQTT? | How to use tutorial | Reyax Broker
Hey, what's up, Guys! Akarsh here from CETech. Weighs as a feather and quick as light this is how we can introduce someone to the technology about which we are going to learn today. The Technology named MQTT is what we are going to learn about today....

Assembly
Instructions from Jump Scare Tombstone
The Hallowing fits on the posts in the center of the tombstone base. I found room on top of it for the battery to sit. The distance sensor fits into the two holes at the bottom and the speaker plugs into the Hallowing and can sit loose or be mounted...

Wiring
Instructions from Guitar Pickguard Wireless MIDI Controller
The wiring is shown in the breadboard diagram below. Before soldering, I recommend first creating a prototype device on a breadboard to ensure you have wired the circuit diagram properly. When creating a device that will be soldered and mounted to a...

|<
<
4
5
6
7
8
>
>|