90 Results for "raspberrypi"

Connect IOT Cricket to RaspberryPi over MQTT
Instructions from Ultra low power WiFi home automation system
In this project we use the IOT Cricket WiFi module for a simple sensor to report a temperature every 30 seconds to our system. It will run on a battery so we can stick it anywhere at home or a garden. Later you can use IOT Cricket to build various battery...

Portable Raspberry Pi with LCD + keypad
Instructions from Portable Raspberry Pi with LCD + keypad
snap together raspberrypi bottom with raspberrypi middle

More Details:
Instructions from RasPiCarStereo
http://www.swampsoft.org/raspberrypi/RasPiCarStereo/RasPiCarStereo.php

Raspberry PI CarPC
Instructions from Raspberry PI CarPC
The whole instructions can be found at: http://engineering-diy.blogspot.ro/2015/01/raspberrypi-carpc-tutorial.html

Portable Raspberry Pi with LCD + keypad
Instructions from Portable Raspberry Pi with LCD + keypad
with small screws attach raspberry pi 3 with raspberrypi bottom

Portable Raspberry Pi with LCD + keypad
Instructions from Portable Raspberry Pi with LCD + keypad
add screen spacer on top the the raspberrypi middle

Update raspberry pi kernels:
Instructions from Make Your Own Google Voice HAT
sudo apt-get update sudo apt-get install raspberrypi-kernel

Smart Greenhouse using a Raspberry Pi
Instructions from Smart Greenhouse using a Raspberry Pi
Connect the components to the RaspberryPi using the Raspberry Pi header.

Hack-Ready Alarm Clock
Instructions from Hack-Ready Alarm Clock
Restart the Raspberry Pi and run the hack-clock software - you should be able to visit the Hack Clock IDE at http://raspberrypi:9003/ - where "raspberrypi" is the hostname or IP address of your Raspberry Pi.

Android/RPi HDMI switch controller using RS232
Instructions from Android/RPi HDMI switch controller using RS232
Disable Bluetooth because it conflicts with UARThttps://diyin.wordpress.com/2016/05/02/how-to-disable-bluetooth-in-raspberrypi-3/After reboot the serial connection should be available at /dev/ttyS0 (and not /dev/ttyAMA0)

LighTouch - Control music with the wave of a hand
Instructions from LighTouch - Control music with the wave of a hand
Connect the Arduino to the RaspberryPi via USB, plug in some speakers (if using the analog output) and reboot

Portable Raspberry Pi with LCD + keypad
Instructions from Portable Raspberry Pi with LCD + keypad
mate the raspberrypi assembly with the super glued screen holder upside down so buttons do not fall out

Link the button wires to the RaspberyPi
Instructions from SomfyPi IO
Connect the other side of the button wires to the GPIOs of the RaspberryPi

Get the binaries
Instructions from Install Stremio on Raspberry Pi
Download the Zip files containing the binaries from the Releases section of the git (https://github.com/shivasiddharth/Stremio-RaspberryPi). Place the downloaded zip in the /home/${USER}/ directory and unzip the file.

Operation: Try to Bare-Metal the Pi
Instructions from Operation: Try to Bare-Metal the Pi
Gather The FilesThere are THREE files you'll need:bootcode.binstart.elf"kernel.img"When downloading these files from these links, DO NOT right-click->download.Instead, DO click the filename to open a new page, then click download. Took a while to figure...

1
2
3
4
5
>
>|