Close

194 Results for "solder fume extractor"

  • Designing a PCB for an IoT Device
  • Hacker page     by Avi Gupta
  • The Internet of Things (IoT) is rapidly transforming the way we live, work, and interact with technology. The vast network of connected devices has opened up new possibilities for data collection, analysis, and control. A key component of IoT devices...

  • Repurposing IDE-Cables (even for video!)
  • Hacker page     by Eric Hertz
  • Briefly: 80-wire IDE cables are *great* for high-speed stuff... But the pinout is a bit more difficult than a straight-through 40-wire IDE cable, because the 80-wire cables have shielding (yay!) which is connected to specific pins designated as ground,...

  • Pi Circle to Teensy Audio Shield and Quad Audio device
  • Hacker page     by Patrick
  • I added the AudioControlSGTL5000 object to my port of the Teensy Audio Library available at https://bitbucket.org/phorton1/src-circle/src/master/   This is, of course, just part of my ongoing rPi bare metal vGuitar Rig project, but I felt like...

  • Arduino Motor Shield PCB V1 | 4 Motors at Once
  • Hacker page     by Jithin Sanal
  • Arduino Motor Shield PCB V1 | 4 Motors at Once Hey guys, welcome back. In my previous post, I explained what an H Bridge Circuit is, L293D motor driver IC and piggybacking L293D Motor driver IC for driving high current motor drivers. In this...

  • Top 10 Drone Frames in India
  • Hacker page     by akanzler007
  • With the Demand of Drones increasing day by day, the protection  of drones has also become important. Drone frame is one of  the important component of a Drone. The structure that holds all the components together. One of the most important...

  • Halving the execution time of an Arduino sketch
  • Hacker page     by Ken Yap
  • I have a large pile of 4164 and 41256 1-bit wide DRAM chips from the PC era. Many of them were extracted from sockets or boards. I was curious to know how many are faulty. A web search quickly turned up many designs for Arduino based DRAM testers. Most...

  • Cheap Bench USB Microscope
  • Hacker page     by Pandaemonium
  • This is my first full post of a hack (nay, an innovation, says you the reader), I realize I will make mistakes in it's presentation but I will endeavor to clarify my future ominous basement doings more clearly based on the kind comments of the bored...

  • Restoring a SNES
  • Hacker page     by mcu_nerd
  • Over a decade a go I got a SNES from some relatives.  When I was doing some cleaning I decided to pull it out.  After cleaning the cartridge slot, it was working but the picture on the TV was pretty terrible. I picked up a cheap composite...

  • Wireless MCU platforms
  • Hacker page     by Christoph Tack
  • ESP32 The ESP32 development boards are not without their problems.  Why keep using them anyway?  The ESP32 IC only costs €2.31/pce on Digikey.  Design a decent breakout board and done! Well, if you don't want to design your own...

  • PCBWay Assembly Service: Give it a try!
  • Hacker page     by Heinz-Peter Liechtenecker
  • I love doing electronics, wearables and especially Software, but as a PhD Student and a full-time worker I for sure do not have the time to solder a bunch of PCBs, especially when I am planning to sell them to my customers or on Tindie. So, that...

  • What is Aluminum PCB? & where is it used?
  • Hacker page     by elizabethjones4256
  • There is no such difference between aluminum and other PCB. All of these circuit boards have the same type of layout, but this circuit system uses various copper layers along with the solder mask. Furthermore, it also adds a silkscreen layer over these...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday