0%

0%

Yoshihiro Nakagawa

いつも心にTMTOWTDIを／宇宙をオモチャに変えるのです！／誰のためでもない、自分自身の祈りのために戦い続けるのよ／一人でも仲間と一緒にいても自分を信じる。仲間を信じるのと同じように自分をね。そうすれば怖くも寂しくもないよ／着実に、忍耐強く、賢くあれ！

geekhouse tsukuba, Ibaraki, Ja

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 11/25/2021.

Projects I Like & Follow

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

alex-klimaj Alex Klimaj

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

Medium-sized 12-DOF Quadruped Robot inspired by MIT Cheetah and Boston Dynamics Spot Mini

NOMAD Quadrupedal Robot

implemented-robotics Implemented Robotics

Projects to modify, customize, upgrade, and improve the Monoprice MP Mini Delta 3D Printer.

Monoprice MP Mini Delta Maximizing Modifications

us-water-rockets U.S. Water Rockets

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

The 2017 Hackaday Prize

Torrus adds interaction to your VR experiences. It contains a trackpad and a 9DOF IMU. Easily create extensions for Torrus !

Torrus - One VR Controller to rule them all

jules-thuillier Jules Thuillier

DSO functions for a CRO

A digital camera for analog oscilloscopes

joseph-eoff Joseph Eoff

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

new-dexterity New Dexterity

Cheap and DIY alternative to commercial security keys such as Yubikey using ST-Link V2 clone dongle

ST-Link V2 clone Security Key

matias-n Matias N.

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

iOmni, is an autonomous (eventually) robot with Lidar to be used as a security system

iOmni

leandro Leandro

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

A while ago, I bought some interesting surplus tube display boards. I reverse engineered and got them working again with a custom driver.

Old Russian VFD module converted into a clock

cselzey cselzey

2021 Hackaday Prize

How to use a Wireless Energy Transfer to indirectly power a transistor-bulb circuit

How to use a Wireless Energy Transfer indirectly

Complete hardware PCB for 60% ANSI Mechanical keyboard with QMK firmware support, Type-C USB, RGB LED underglow

Mechanical Keyboard 60% ANSI hardware

thuan-le Thuan Le

This robot car is controlled by a smartphone through wi-fi. I have attached everything with this instructable with an explanation

WiFi Controlled robot with NodeMCU

IoT gateway device for use by anyone, to control anything, from anywhere!

Pebl - the complete IoT package for makers

fingoti Fingoti

View all

Bits