0%

0%

soumahoro amadou

curieux,toujours à la recherche de savoir de nouvelle connaissances et passionnée de physique appliquée

Côte d’Ivoire

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/03/2022.

Things I've Built

je travail actuellement sur la simulation d'une cellule tandem CIGS/pérovskite

Projects I Like & Follow

This is an open source hardware, i made for use of build CNC printers.

Arduino CNC Shield

brijesh-sondarva Brijesh Sondarva

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

colby-johnson Colby Johnson

Program ESP2866 with Visuino to flash a LED

Blink with ESP8266 and Visuino

boian-mitov Boian Mitov

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

The entire rocket and the fuel are all made of 3D printed PLA.

Fully 3D printed rocket with 3D printed fuel

The 2017 Hackaday Prize

A cheap to produce and easy to assemble robot for use in STEM education.

E.R.N.I.E

sebastian-goscik Sebastian Goscik

COMPLETE PROJECT WITH A CHIP ELECTRONIC PARTS ARDUINO COIN ACEPTOR (USED FROM OLD MACHINE) POWER SUPPLY 6 RESISTORS RELAY 12 V

ARDUINO SINGLE CIGARETTE VENDING MACHINE

A home brew 2716 (16kbit) PROM programmer performs by setting addresses and data with toggle switches byte by byte

Fully manual PROM programmer

mitsuru-yamada Mitsuru Yamada

WaterJet for drone

UNDERWATER IMPELLER MOTOR

roman-weitendorf Roman Weitendorf

This project is a answer to question "How a DIY nano drone look,feel and fly made out of MDF ,3D printed parts?".

DIY Nano Drone

ramkumar-r RAMKUMAR R

A few months ago I discovered "How to Build a Digital Computer That Works" and got excited about the project.

PaperClip Computer

marcelo Marcelo

In order to display the function of NE555, I made an object that can replace two resistors and a diode.

Spot the NE555!

Breakout a feather board to Arduino R3 Layout!

Feather R3 Adapter

Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking

Large Humanoid Robot

3D open source actuator & solenoid simulation software

DoSA-3D

open-source-actuator Open Source Actuator

A small spider-robot with web throwing, climbing and swinging abilities (sort of)

Robot swings & climbs like Spider-Man

Bosch Sensortec optimizes its IMUs (Inertial Measurement Units) for advanced smartphones, wearables, AR and VR, drones, gaming and robots...

Inertial Measurement Unit

Supplyframe DesignLab: 2022 Hackada…

Nylon fabric gets grinded, dried, extruded in form of pellets and finally used to produce objects with 3D printing

Recycling Textile Nylon from t-shirt to 3D prints

Matteo Fabrizio

View all

Bits