0%

0%

Jennifer

just a mom getting into home automation, iot and microcontrollers

Butte, MT, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/08/2021.

Projects I Like & Follow

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

The 2018 Hackaday Prize

nRF52832 ECG fitness tracker hacked into EEG glasses using Arduino code + detect concentration/relaxation with neural network web app

Hacking a $35 ECG nRF52 Fitness Tracker into EEG

curt-white Curt White

Setup MetaTrader on your ARM device and an automated trading robot for Forex

MetaTrader 4 on Raspberry Pi or any other ARM

Step-by-step instruction to run Wine on Raspberry Pi (or other ARM) using ExaGear Desktop

Run Wine on Raspberry Pi

Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.

Solar & supercap charged LoRaWAN IoT device

Using a terminal from 1976 as home automation hub. Because we can.

ADM-3A Dumb Terminal Home Automation Hub

daniel-karpantschof Daniel Karpantschof

Week of Arduino

Arduino Skillz

extended control of heater/pump/blower, costs tracking and preview, alert up-on fault, LED lights add-on

Lay-Z Spa Remote Control

4G (100 mbps down/ 50 mbps up) – Ultra fast internet connectivity for your Raspberry Pi, excellent for large downloads and video streaming.

IoT Bit 4G & LTE Hat for the Raspberry Pi

Scalable swarm robot platform using ESP32 MESH capabilities and custom IR location

Swarmesh NYU Shanghai

rodolfo Rodolfo

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

Hackaday Prize 2019

The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.

Ultra Servo V2.0

Look mom, no MCU!

All-hardware frequency meter and LCR

This is just a hexapod made in a 3d printer to educational and ertertainment pourposes

3D Printed Hexapod

vincius-jean-ferreira Vinícius Jean Ferreira

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

Unique tool and desktop or wind sill trinket to alert when the ISS is overhead.

3D Printed ISS desktop beacon and IFTTT notifier

A PCB badge for the Hacking conference, Carolina Con. Features PCB art and glowing eyes.

Carolina Con 16 Hardware Badge

View all

Bits