0%

0%

jseal1987

i'm not a very good pitcher to start with, and i'm sure I couldn't ever pitch something as heavy as an elevator.

Poplarville, MS

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/05/2022.

Projects I Like & Follow

Hackaday Prize 2019

This hybrid generator for drones is designed to get 10 times the flight time of a classic electric drone

HYBRID GENERATOR FOR DRONES

Raspberry Pi Compute Module 4 carrier that plugs directly to HDMI port.

Raspberry Pi CM4 TV Stick

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

Build a COVID-19 shield with a device that estimates skin temperature and indicates if a person might have a fever.

Skin Temperature Scanner

gilbert-franois Gilbert François

Building and tinkering with crystal radios goes back to my childhood of the late 1960's and coming round again.

Shortwave Crystal Radio - A blast from my past

dr-cockroach Dr. Cockroach

Project of metal 3D-printer for printing unique metal parts, by using welding wire, induction heating and other physics)))

Metal 3D-printer based on induction heating...

sergey-r Sergey R.

2021 Hackaday Prize

Yet another overkill project. An attempt at building a portable and versatile GCS for robotics.

Robotics Ground Control Station

maximiliano-palay Maximiliano Palay

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

iOmni, is an autonomous (eventually) robot with Lidar to be used as a security system

iOmni

leandro Leandro

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

A mesh network is a network in which the devices -- or nodes -- are connected so that at least some, and sometimes all, have multiple paths

Smart Music Player using LoRa Mesh Network

Summary of my struggles with automotive CAN bus sniffing and Bluetooth LE powered microcontrollers (nRF51)

Switching music with CAN bus

wiktor-burdecki Wiktor Burdecki

You get what you pay for!

Cheap But Crummy 10 GHz Transmitter and Receiver

a series of opensource lamps to experiment with and master lighting.

3D Printed Opensource Lamps

2021 Hackaday Prize

How to use a Wireless Energy Transfer to indirectly power a transistor-bulb circuit

How to use a Wireless Energy Transfer indirectly

USB ISP Programmer for AVR Microcontrollers based on ATtiny85

USBtinyISP AVR Programmer

stefan-wagner Stefan Wagner

2021 Hackaday Prize

Robot on a tank chassis with a manipulator and FPV camera.

General purpose remote controlled mobile robot

View all

Bits