0%

0%

Timo Birnschein

Video Maker, 3D-Printer, CAD-Designer, Electric Skateboarder, Scientist

Bay Area

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/06/2014.

My Projects

A PCB mill inspired by open source CNC 3D printers with a custom design to fit standard size copper clad boards (6" x 4" / 160mm x 100mm)

Sub $200 PCB Mill that doesn't suck!

Timo Birnschein

Building a Spot Welder for 18650 battery packs is an interesting and challenging adventure. How to over-engineer a spot welder.

DIY Spot Welder for Creating Battery Packs

Timo Birnschein

A brief summary on how I use my K40 laser cutter with custom GRBL controller. However, this workflow should work for all GRBL lasers.

Inkscape + VisiCut = Perfect Lasercutting Workflow

Timo Birnschein

I am in the process of implementing an autopilot on my 42' Uniflite Aft Cabin Cruiser based on the original 1984 hydraulic steering system.

OpenCPN Chart Plotter /w Autopilot and Waypoints

Timo Birnschein

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

Timo Birnschein

Five channel battery monitor with LCD status display and NRF24 Network wireless communication for marine and RV applications.

A Simple 5 Ch Boat Battery Monitor

Timo Birnschein

View all 11 projects

Projects I Like & Follow

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

Nicholas Seward

The 2018 Hackaday Prize

A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.

HiveTracker

Advanced Pick and Place machine

brdMaker

Conference badge for the 2017 Hackaday Superconference Features: camera module, 128x128 OLED display, MicroSD card socket and accelerometer

Camera badge for Supercon 2017

A better-than-servo motor for robotics

Custom motor for robotics

3d position tracking using our own design of the sensors, an altera fpga for decoding the signals and custom code for triangulation and poseestimation

HTC vive lighthouse custom tracking

The 2018 Hackaday Prize

Biomedical Imaging project using AC currents.

Spectra: Open Biomedical Imaging

A Swiss type mill turn center for cutting metal

SwissMak

Generic Default

Augmented Reality glasses using modified lowcost Android phones

Less than $100, high FOV, mobile AR glasses

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

The 2017 Hackaday Prize

DIY DLP 3D Printer based on NanoDLP Software using Raspberry Pi 3 and Trinamic Motor Controller

ADAM DLP 3D Printer

The 2017 Hackaday Prize

Full featured thermal camera, smaller than a credit card.

Pocket thermal camera

Open Source Closed Loop Stepper Motor Controller! Turns your Stepper Motors into Smart Servo Motors

Smart Stepper

Hackaday Prize 2019

Game Boy Pocket form factor of an ESP32 based gaming device

Retro ESP32

Eugene Andruszczenko

Refactoring the SMT50 to work with OpenPnP

Hot Hot (Yushengtech) SMT50 OpenPnP conversion

The 2018 Hackaday Prize

Worlds Largest 7" Diagnal personal AR display in a motorcycle helmet, see 360 degree view, smart interface. Flir, IR and Ultrasonic

Cyborg 360 Flir AR HUD Motorcycle Helmet

The 2017 Hackaday Prize

Rapid, hassle-free, and eco-friendly PCBs via automated etching, soldermasking and silkscreening

etchr, the PCB printer

View all

Bits

Timo Birnschein wrote 06/04/2017 at 17:29

Casual hacker.

3D printing, laser cutting, electronics engineering, Arduino programming, pcb milling, (aerial) videographer

Are you sure? yes | no